#              model: D53G-5HacD2HnD&FG621-EA
#      serial-number: HFD095B8BTD
#      firmware-type: ipq4000L
#   current-firmware: 7.13.4
#   installed-version: 7.14rc1
# 
# software id = 2M51-D2C0
#
# model = D53G-5HacD2HnD&FG621-EA
# serial number = HFD095B8BTD
/interface bridge
add name=bridge1
/interface lte
set [ find default-name=lte1 ] allow-roaming=no band="" sms-read=no
/interface list
add name=discover
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=LIBERTY2ENSI
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment="ENSI wifi" country=no_country_set frequency=2427 frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=ENSILIBERTY2 wireless-protocol=802.11 wps-mode=disabled
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="ENSI wifi" country=no_country_set frequency=5220 frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=ENSILIBERTY2 wireless-protocol=802.11 wps-mode=disabled
/interface wireless manual-tx-power-table
set wlan1 comment="ENSI wifi"
set wlan2 comment="ENSI wifi"
/interface wireless nstreme
set wlan1 comment="ENSI wifi"
set wlan2 comment="ENSI wifi"
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip pool
add name=dhcp_pool0 ranges=192.168.88.20-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool0 interface=bridge1 lease-time=10m name=dhcp1
/ip smb users
set [ find default=yes ] disabled=yes read-only=yes
/interface l2tp-client
add add-default-route=yes allow-fast-path=yes connect-to=86.109.64.70 disabled=no name=l2tp-out1 password=oHUI8UG2lJHI profile=default user=mobil77
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=wlan2
/interface bridge settings
set use-ip-firewall=yes
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=discover
/interface list member
add interface=l2tp-out1 list=discover
/interface sstp-server server
set ciphers=aes256-sha
/ip address
add address=192.168.88.1/24 interface=bridge1 network=192.168.88.0
/ip cloud
set ddns-enabled=yes ddns-update-interval=1m
/ip dhcp-client
# DHCP client can not run on slave or passthrough interface!
add interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 dns-server=86.109.64.5,86.109.64.66 gateway=192.168.88.1
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes
add action=accept chain=forward connection-state=established,related
/ip firewall nat
add action=masquerade chain=srcnat out-interface=l2tp-out1 src-address=192.168.88.0/24
/ip route
add disabled=no dst-address=86.109.64.70/32 gateway=lte1 routing-table=main suppress-hw-offload=no
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip smb shares
set [ find default=yes ] directory=/flash/pub
/snmp
set contact=admin@rlan.hu enabled=yes location=Budapest
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-mobil77-ENSIBPKonyvesKalmankrt
/system logging
add action=remote topics=info
add action=remote topics=error
add action=remote topics=critical
add action=remote topics=warning
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=time.rlan.hu
/system package update
set channel=testing
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2021-05-19 start-time=10:10:51
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/system watchdog
set ping-start-after-boot=15m watch-address=86.109.64.70
/tool e-mail
set from=gw-mobil77@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add