#              model: RouterBOARD LtAP-2HnD
#      serial-number: A4340A563A0A
#      firmware-type: mt7621L
#   current-firmware: 6.49.2
#   installed-version: 6.49.15
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = G1T3-MFQM
#
# model = RouterBOARD LtAP-2HnD
# serial number = A4340A563A0A
/interface bridge
add name=lfmt-bridge
/interface lte
set [ find ] allow-roaming=no mtu=1500 name=lte1 network-mode=3g,lte
/interface lte apn
set [ find default=yes ] apn=net
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa-pre-shared-key=rlanrlan
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-b/g/n channel-width=20/40mhz-XX comment=Management country=hungary frequency=2452 mode=ap-bridge security-profile=wpa2 ssid="RLAN INTERNET" station-roaming=enabled wireless-protocol=802.11
/interface wireless manual-tx-power-table
set wlan1 comment=Management
/interface wireless nstreme
set wlan1 comment=Management
/ip pool
add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254
add name=dhcp_pool1 ranges=192.168.1.2-192.168.1.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=wlan1 lease-time=30m name=dhcp1
add address-pool=dhcp_pool1 disabled=no lease-time=30m name=dhcp2
/ppp profile
add bridge=lfmt-bridge name=lfmt
/interface l2tp-client
add connect-to=86.109.64.70 disabled=no name=l2tp-budapest password=UPPGjan1 profile=lfmt user=lfmt56
/queue simple
add limit-at=5M/5M max-limit=5M/5M name=FREE target=192.168.1.0/24
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp"
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=lfmt-bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=none
/ip address
add address=192.168.88.1/24 interface=wlan1 network=192.168.88.0
add address=10.96.53.22/24 disabled=yes interface=ether1 network=10.96.53.0
add address=86.109.69.93/30 interface=ether1 network=86.109.69.92
/ip cloud
set ddns-enabled=yes ddns-update-interval=1m
/ip dhcp-client
add default-route-distance=111 interface=ether1
/ip dhcp-server network
add address=192.168.1.0/24 dns-server=8.8.8.8,86.109.64.5 gateway=192.168.1.1
add address=192.168.88.0/24 dns-server=8.8.8.8,86.109.64.5 gateway=192.168.88.1
/ip dns
set servers=86.109.64.5
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=1,5 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip firewall mangle
# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (lfmt-bridge)
add action=mark-routing chain=prerouting dst-address=!86.109.66.80/30 in-interface=ether1 new-routing-mark=budapest passthrough=yes
/ip firewall nat
add action=src-nat chain=srcnat src-address=192.168.88.0/24 to-addresses=86.109.69.93
/ip route
add check-gateway=ping disabled=yes distance=1 gateway=10.96.53.1
add check-gateway=ping disabled=yes distance=1 gateway=10.250.0.123
add distance=1 dst-address=86.109.64.70/32 gateway=lte1
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact=admin@rlan.hu enabled=yes location=Nagycenk
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-lfmt56-NemesNagycenk
/system logging
add disabled=yes topics=lte
add action=remote topics=info
add action=remote topics=error
add action=remote topics=warning
add action=remote topics=critical
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system routerboard modem
set sim-slot=3
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=apr/09/2018 start-time=11:47:59
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/system watchdog
set ping-start-after-boot=14m watchdog-timer=no
/tool e-mail
set address=86.109.64.10 from=gw-lfmt56@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add