#              model: CubeG-5ac60ad
#      serial-number: E29D0E48DE6F
#      firmware-type: ipq4000L
#   current-firmware: 7.12.1
#   installed-version: 7.14.2
# 
# software id = 6G5S-W1SN
#
# model = CubeG-5ac60ad
# serial number = E29D0E48DE6F
/interface bridge
add name=bridge1 port-cost-mode=short
/interface ethernet
set [ find default-name=ether1 ] comment="Uplink Telekom"
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX comment="5GHz Backup link" country=uzbekistan disabled=no frequency=5300 frequency-mode=superchannel installation=outdoor mode=bridge name=wlan1-5GHz-backup nv2-preshared-key=dsjnf99 nv2-security=enabled ssid=RLAN_ZALAVAR1 wireless-protocol=nv2-nstreme
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 password=Sunshine112@6G user=doborjaniskola1@rlan.hu
/interface wireless nstreme
set wlan1-5GHz-backup comment="5GHz Backup link" enable-nstreme=yes framer-policy=dynamic-size
/interface w60g
set [ find ] disabled=no frequency=64800 mode=bridge name=wlan60-1 password=linko1 put-stations-in-bridge=bridge1 region=no-region-set ssid=RLAN_ZALAVAR1
/interface w60g station
add mac-address=2C:C8:1B:41:69:D6 name=wlan60-station-1 parent=wlan60-1 remote-address=2C:C8:1B:41:70:35
/interface wireless manual-tx-power-table
set wlan1-5GHz-backup comment="5GHz Backup link"
/interface bonding
add mode=active-backup name=bonding1 primary=wlan60-station-1 slaves=wlan60-station-1,wlan1-5GHz-backup
/interface list
add name=discover
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip smb users
set [ find default=yes ] disabled=yes
/port
set 0 name=serial0
/ppp profile
add bridge=bridge1 name=l2tp
/interface l2tp-client
add allow-fast-path=yes connect-to=86.109.64.70 disabled=no mrru=1600 name=l2tp-budapest password=OPgzu7gzuGZ8 profile=l2tp user=doborjani
/routing bgp template
set default disabled=no output.network=bgp-networks
/routing ospf instance
add disabled=no name=default-v2
/routing ospf area
add disabled=yes instance=default-v2 name=backbone-v2
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"
/interface bridge port
add bridge=bridge1 ingress-filtering=no interface=bonding1 internal-path-cost=10 path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=discover
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=8192
/interface list member
add interface=wlan60-1 list=discover
add interface=wlan60-station-1 list=discover
add interface=wlan1-5GHz-backup list=discover
add interface=l2tp-budapest list=discover
add interface=bridge1 list=discover
add interface=bonding1 list=discover
/interface ovpn-server server
set auth=sha1,md5
/ip address
add address=10.99.7.5/24 interface=bridge1 network=10.99.7.0
/ip cloud
set ddns-enabled=yes ddns-update-interval=1m
/ip dhcp-client
add default-route-distance=20 interface=ether1
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip route
add check-gateway=ping disabled=no dst-address=86.109.64.0/27 gateway=10.99.7.1 routing-table=main suppress-hw-offload=no
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip smb shares
set [ find default=yes ] directory=/flash/pub
/routing bfd configuration
add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5
/snmp
set contact=admin@rlan.hu enabled=yes location=Sopron
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-doborjaniporta-iskola
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=time.rlan.hu
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2021-08-03 start-time=09:59:01
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n"
/system watchdog
set ping-start-after-boot=55m watch-address=86.109.64.70
/tool e-mail
set from=gw-doborjaniporta-iskola@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add
/tool sniffer
set file-limit=10000KiB filter-interface=*8