#              model: RouterBOARD 750 r2
#      serial-number: 67D2054EAE3E
#      firmware-type: qca9531L
#   current-firmware: 6.43.1
#   installed-version: 6.49.6
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# 
# software id = YTET-I2NT
#
# model = RouterBOARD 750 r2
# serial number = 67D2054EAE3E
/interface bridge
add name=bridge
/interface ethernet
set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=UPLINK
set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="Karc FM"
set [ find default-name=ether4 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether5 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=Aramszunet
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=fw-upc
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-128-cbc
/ip pool
add name=dhcp_pool0 ranges=86.109.69.162
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=ether3 name=dhcp1
/queue simple
add limit-at=10M/10M max-limit=10M/10M name="Karc FM" target=86.109.69.162/32
/snmp community
set [ find default=yes ] addresses=10.0.0.2/32,86.109.64.0/27
add addresses=10.0.0.2/32,86.109.64.0/27 name=partnerlogin
/system logging action
set 1 disk-file-name=log
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge interface=ether2
add bridge=bridge interface=ether1
add bridge=bridge disabled=yes interface=ether3
add bridge=bridge interface=ether4
add bridge=bridge interface=ether5
/interface bridge settings
set use-ip-firewall=yes
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface l2tp-server server
set enabled=yes ipsec-secret=BkWUe3cb2W mrru=1500 use-ipsec=required
/ip address
add address=86.109.69.161/30 interface=ether3 network=86.109.69.160
add address=10.99.22.13/24 interface=bridge network=10.99.22.0
/ip dhcp-client
add default-route-distance=20 interface=ether2 use-peer-dns=no use-peer-ntp=no
/ip dhcp-server network
add address=86.109.69.160/30 gateway=86.109.69.161
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
add action=fasttrack-connection chain=forward connection-state=established,related protocol=tcp
add action=accept chain=forward connection-state=established,related protocol=tcp
/ip ipsec policy
set 0 disabled=yes
/ip route
add distance=1 gateway=10.99.22.1
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip smb shares
set [ find default=yes ] directory=/pub
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/ppp profile
add local-address=10.0.2.1 name=ipsec remote-address=*2
/ppp secret
add name=Ancsa password=MyGm3JQ207 profile=ipsec service=l2tp
add name=Csapod password=VIdIcomnAMET profile=ipsec service=l2tp
add name=Gabor password=MyGm3JQ456 profile=ipsec service=l2tp
add name=Niki password=MyGm3FR456 profile=ipsec service=l2tp
add name=Kriszlaptop password=ZHGm3FR456 profile=ipsec service=l2tp
add name=GG_Laptop password=Jel2zO@12 profile=ipsec service=l2tp
/snmp
set contact=admin@rlan.hu enabled=yes location=Sopron
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-sopronlaktanya
/system logging
add action=remote topics=info
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=warning
add action=remote topics=info
add action=remote topics=error
add action=remote topics=critical
add action=remote topics=warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5 server-dns-names=time.rlan.hu
/system routerboard settings
set boot-os=router-os
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=jun/09/2016 start-time=09:10:31
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n"
/system watchdog
set auto-send-supout=yes send-email-from=sparta@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10
/tool e-mail
set address=86.109.64.10 from=gw-sopronlaktanya@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add