#              model: Groove 52HPn
#      serial-number: 64A405FD7231
#      firmware-type: ar9340
#   current-firmware: 6.49.2
#   installed-version: 6.49.2
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = KEDH-NQTB
#
# model = Groove 52HPn
# serial number = 64A405FD7231
/interface ethernet
set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
/interface bridge
add fast-forward=no name=bridge1
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n channel-width=20/40mhz-Ce comment="5180,5280,5500,5745,5825 van a tuloldalon" country=uzbekistan disabled=no frequency=5280 frequency-mode=superchannel mode=bridge nv2-cell-radius=50 scan-list=5000-6000 ssid=sm station-roaming=enabled wireless-protocol=nv2
/interface wireless nstreme
set wlan1 comment="5180,5280,5500,5745,5825 van a tuloldalon" enable-nstreme=yes framer-policy=dynamic-size
/interface wireless manual-tx-power-table
set wlan1 comment="5180,5280,5500,5745,5825 van a tuloldalon"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-128-cbc
/snmp community
set [ find default=yes ] addresses=10.0.0.2/32,86.109.64.0/27
add addresses=10.0.0.2/32,86.109.64.0/27 name=partnerlogin
/system logging action
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 hw=no interface=ether1
add bridge=bridge1 interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=10.99.17.12/24 interface=bridge1 network=10.99.17.0
/ip dns
set servers=86.109.64.5
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input dst-port=21-23 protocol=tcp src-address=10.0.0.0/8
add action=accept chain=input dst-port=21-23 protocol=tcp src-address=86.109.64.0/19
add action=drop chain=input dst-port=21-23 protocol=tcp
/ip route
add distance=1 gateway=10.99.17.1
/ip service
set www address=86.109.64.0/27
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact=admi@rlan.hu enabled=yes location=Sopron
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-sopron-janossomorja
/system leds
set 0 interface=wlan1
/system logging
add action=remote topics=info
add action=remote topics=critical
add topics=error
add action=remote topics=warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=jun/16/2016 start-time=12:20:26
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/system\_backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n"
/system watchdog
set auto-send-supout=yes send-email-from=gw-sopron-janossomorja@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10
/tool e-mail
set address=86.109.64.10 from=gw-sopron-janossomorja@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add