#              model: 433
#      serial-number: 213B01836C82
#      firmware-type: ar7100
#   current-firmware: 6.48.2
#   installed-version: 6.49.6
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# U device changed                           admin            write              
# U device changed                           admin            write              
# U device changed                           admin            write              
# U wireless security profile <wpa2-wlan1... admin            write              
# U wireless security profile <wpa2-wlan3... admin            write              
# U wireless security profile <wpa2-wlan2... admin            write              
# U device changed                           admin            write              
# 
# software id = WAIW-8F07
#
# model = 433
# serial number = 213B01836C82
/interface ethernet
set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="Helyi ugyfel"
set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="Aramszunet figyelo"
/interface bridge
add fast-forward=no mtu=1500 name=bridge1
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment=Harka country=no_country_set disabled=no frequency=5785 frequency-mode=superchannel mode=bridge nv2-preshared-key=dsjnf999 scan-list=5000-6000 ssid=RLAN_NAHA wireless-protocol=nv2
set [ find default-name=wlan3 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n channel-width=20/40mhz-XX comment="Uplink Sopron" country=no_country_set disabled=no frequency-mode=superchannel mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled scan-list=5480 ssid=RLAN_SONAMJR wireless-protocol=nv2-nstreme
/interface wireless nstreme
set wlan1 comment=Harka enable-nstreme=yes framer-policy=best-fit
set wlan3 comment="Uplink Sopron" enable-nstreme=yes
/interface wireless manual-tx-power-table
set wlan1 comment=Harka
set wlan3 comment="Uplink Sopron"
/interface list
add exclude=dynamic name=discover
/interface wireless security-profiles
set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers=""
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2-wlan2 supplicant-identity="" wpa2-pre-shared-key=RLAN_NAMA
/interface wireless
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment=User country=no_country_set disabled=no frequency=2442 frequency-mode=superchannel mode=ap-bridge nv2-preshared-key=RLAN_NAMA nv2-security=enabled security-profile=wpa2-wlan2 ssid=RLAN_NAMA wireless-protocol=nv2
/interface wireless nstreme
set wlan2 comment=User enable-nstreme=yes framer-policy=best-fit
/interface wireless manual-tx-power-table
set wlan2 comment=User
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/queue interface
set ether1 queue=ethernet-default
set ether2 queue=ethernet-default
set ether3 queue=ethernet-default
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
add addresses=86.109.64.0/27 name=partnerlogin
add addresses=10.0.0.2/32 name=cljelszintmero
/system logging action
set 0 memory-lines=300
set 1 disk-lines-per-file=300
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 hw=no interface=ether1
add bridge=bridge1 hw=no interface=ether2
add bridge=bridge1 hw=no interface=ether3
add bridge=bridge1 interface=wlan3
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=discover
/interface list member
add interface=ether1 list=discover
add interface=ether2 list=discover
add interface=ether3 list=discover
add list=discover
add list=discover
add interface=bridge1 list=discover
/interface wireless access-list
add mac-address=00:17:B7:60:01:D1 vlan-mode=no-tag
add mac-address=F4:EC:38:B7:C1:A5 vlan-mode=no-tag
add mac-address=90:F6:52:40:5B:49 vlan-mode=no-tag
add mac-address=64:70:02:B9:C9:83 vlan-mode=no-tag
/ip address
add address=10.99.14.10/24 interface=bridge1 network=10.99.14.0
/ip dns
set max-udp-packet-size=512 servers=86.109.64.5,86.109.64.6
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip proxy
set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0
/ip route
add distance=1 gateway=10.99.14.1
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/snmp
set contact=magic@magicnet.hu enabled=yes location=Nagycenk trap-target=0.0.0.0
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Budapest
/system identity
set name=gw-nagycenkmajor
/system logging
add topics=wireless
add action=remote topics=info
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=feb/07/2014 start-time=15:55:46
/system script
add dont-require-permissions=no name=mentes owner=root policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n"
/system watchdog
set auto-send-supout=yes ping-start-after-boot=55m send-email-from=gw-szerecseny@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10
/tool e-mail
set address=86.109.64.10 from=gw-nagycenkmajor@magicnet.hu
/tool graphing interface
add
/tool graphing resource
add