#              model: RB433
#      serial-number: 213B01836C8F
#      firmware-type: ar7100
#   current-firmware: 7.2.3
#   installed-version: 7.14.2
# 
# software id = Y780-XANE
#
# model = RB433
# serial number = 213B01836C8F
/interface bridge
add fast-forward=no mtu=1500 name=bridge1 port-cost-mode=short protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" mac-address=00:0C:42:43:0B:B5
set [ find default-name=ether2 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" mac-address=00:0C:42:43:0B:B6
set [ find default-name=ether3 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" mac-address=00:0C:42:43:0B:B7
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-onlyg country=no_country_set disabled=no frequency=2412 frequency-mode=superchannel mode=ap-bridge name=wlan4 nv2-preshared-key=RLAN_KHD1 nv2-security=enabled scan-list=2400-2500 ssid=RLAN_KHD1 wireless-protocol=nv2
set [ find default-name=wlan2 ] band=2ghz-onlyg country=no_country_set disabled=no frequency=2432 frequency-mode=superchannel name=wlan5 nv2-preshared-key=RLAN_KHD2 nv2-security=enabled scan-list=2400-2500 ssid=RLAN_KHD2 wireless-protocol=nv2
set [ find default-name=wlan3 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-onlyg country=no_country_set disabled=no frequency=2462 frequency-mode=superchannel mode=bridge name=wlan6 nv2-preshared-key=RLAN_KHD3 nv2-security=enabled scan-list=2400-2500 ssid=RLAN_KHD3 wireless-protocol=nv2
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers=""
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wifi supplicant-identity="" wpa2-pre-shared-key=aJUhguGZf3
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=RLAN_KSOMLYO
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/ip pool
add name=dhcp_pool0 ranges=192.168.1.2-192.168.1.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=yes interface=wlan4 lease-time=10m name=dhcp1
/ip smb users
set [ find default=yes ] disabled=yes
/port
set 0 name=serial0
/queue simple
add limit-at=10M/10M max-limit=10M/10M name="Kissonlyo Wifi" target=86.109.69.134/32
/queue interface
set ether1 queue=ethernet-default
set ether2 queue=ethernet-default
set ether3 queue=ethernet-default
/routing bgp template
set default disabled=no output.network=bgp-networks
/routing ospf instance
add disabled=no name=default-v2
/routing ospf area
add disabled=yes instance=default-v2 name=backbone-v2
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"
/interface bridge port
add bridge=bridge1 hw=no ingress-filtering=no interface=ether1 internal-path-cost=10 path-cost=10
add bridge=bridge1 ingress-filtering=no interface=wlan4 internal-path-cost=10 path-cost=10
add bridge=bridge1 hw=no ingress-filtering=no interface=ether2 internal-path-cost=10 path-cost=10
add bridge=bridge1 hw=no ingress-filtering=no interface=ether3 internal-path-cost=10 path-cost=10
add bridge=bridge1 ingress-filtering=no interface=wlan5 internal-path-cost=10 path-cost=10
add bridge=bridge1 ingress-filtering=no interface=wlan6 internal-path-cost=10 path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip settings
set max-neighbor-entries=8192
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=8192
/ip address
add address=10.99.12.4/24 interface=bridge1 network=10.99.12.0
add address=10.99.12.5/24 interface=bridge1 network=10.99.12.0
add address=10.99.12.6/24 interface=bridge1 network=10.99.12.0
add address=10.99.12.7/24 interface=bridge1 network=10.99.12.0
/ip dhcp-server network
add address=192.168.1.0/24 gateway=192.168.1.1
/ip dns
set max-udp-packet-size=512 servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip firewall nat
add action=src-nat chain=srcnat src-address=192.168.1.0/24 to-addresses=86.109.69.134
/ip proxy
set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=10.99.12.1 routing-table=main suppress-hw-offload=no
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip smb shares
set [ find default=yes ] directory=/pub
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/routing bfd configuration
add disabled=no
/snmp
set contact=admin@rlan.hu enabled=yes location=Sopronkohida trap-target=0.0.0.0
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Budapest
/system identity
set name=gw-sopronkohida
/system logging
add action=remote topics=info,critical,error,warning
add disabled=yes topics=wireless
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=time.rlan.hu
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=2013-12-03 start-time=13:27:34
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n\r\n"
/system watchdog
set auto-send-supout=yes ping-start-after-boot=55m send-email-from=gw-kissomlyo@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 watch-address=10.99.12.9
/tool bandwidth-server
set max-sessions=10
/tool e-mail
set from=gw-sopronkohida@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing resource
add