# model: 433 # serial-number: 29380163217F # firmware-type: ar7100 # current-firmware: 3.24 # installed-version: 6.49.7 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = 2RTS-0D5L # # model = 433 # serial number = 29380163217F /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full auto-negotiation=no speed=10Mbps /interface bridge add fast-forward=no mtu=1500 name=bridge1 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment="UPLINK FERTOSZEPLAK MAGTAR" country=no_country_set disabled=no frequency=5745 frequency-mode=superchannel mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled radio-name=Sarrod scan-list=5000-6000 ssid=RLAN_FSZS station-roaming=enabled wireless-protocol=nv2-nstreme set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment="USER AG KORSUGARZO" country=uzbekistan default-forwarding=no disabled=no frequency=5805 frequency-mode=manual-txpower mode=ap-bridge nv2-preshared-key=RLAN_SARROD nv2-security=enabled ssid=RLAN_SARROD station-roaming=enabled tx-power=22 tx-power-mode=card-rates wireless-protocol=nv2 /interface wireless nstreme set wlan1 comment="UPLINK FERTOSZEPLAK MAGTAR" enable-nstreme=yes set wlan2 comment="USER AG KORSUGARZO" /interface wireless manual-tx-power-table set wlan1 comment="UPLINK FERTOSZEPLAK MAGTAR" set wlan2 comment="USER AG KORSUGARZO" /interface list add exclude=dynamic name=discover /interface wireless security-profiles set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers="" /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet-default set ether3 queue=ethernet-default /snmp community set [ find default=yes ] addresses=86.109.64.0/27 add addresses=10.0.0.2/32 name=partnerlogin add addresses=10.0.0.2/32 name=cljelszintmero /system logging action set 0 memory-lines=100 set 1 disk-lines-per-file=100 set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge1 hw=no interface=ether1 add bridge=bridge1 hw=no interface=ether2 add bridge=bridge1 interface=wlan1 add bridge=bridge1 interface=wlan2 add bridge=bridge1 hw=no interface=ether3 /ip neighbor discovery-settings set discover-interface-list=discover /interface list member add interface=ether1 list=discover add interface=ether2 list=discover add interface=ether3 list=discover add interface=wlan1 list=discover add interface=bridge1 list=discover /ip address add address=10.99.101.17/24 interface=bridge1 network=10.99.101.0 add address=10.99.101.18/24 interface=bridge1 network=10.99.101.0 /ip dns set max-udp-packet-size=512 servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ez torolheto" list=support add address=192.168.88.0/24 list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000 add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related add action=accept chain=forward connection-state=established,related /ip proxy set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0 /ip route add distance=1 gateway=10.99.102.1 add distance=1 gateway=10.99.101.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /snmp set contact=admin@rlan.hu enabled=yes location=Budapest trap-target=0.0.0.0 /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=gw-sarrod /system logging add action=remote topics=info,critical,error,warning add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 server-dns-names=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=jul/24/2012 start-time=09:18:48 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set auto-send-supout=yes send-email-from=gw-sarrod@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 /tool e-mail set address=86.109.64.10 from=gw-sarrod@magicnet.hu /tool graphing interface add /tool graphing resource add