# model: 433 # serial-number: 29390170EB22 # firmware-type: ar7100 # current-firmware: 6.42.5 # installed-version: 6.49.7 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = LYKE-R3P8 # # model = 433 # serial number = 29390170EB22 /interface bridge add fast-forward=no mtu=1500 name=bridge1 protocol-mode=none /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=HIBAS disabled=yes mac-address=00:0C:42:43:8D:19 set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=UPLINK mac-address=00:0C:42:43:8D:1A speed=10Mbps set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full mac-address=00:0C:42:43:8D:1B speed=10Mbps /interface wireless set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment="KASTELY LINK" country=uzbekistan disabled=no frequency=5500 frequency-mode=superchannel mode=bridge name=wlan3 radio-name=Fertoszeplak ssid=RLAN_FSZKA station-roaming=enabled wds-default-bridge=bridge1 wds-mode=dynamic wireless-protocol=nv2 /interface wireless nstreme set wlan3 comment="KASTELY LINK" enable-nstreme=yes framer-policy=dynamic-size /interface wireless manual-tx-power-table set wlan3 comment="KASTELY LINK" /interface list add exclude=dynamic name=discover /interface wireless security-profiles set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers="" add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=RLANRLAN /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b band=2ghz-b comment="USER AG KORSUGARZO" country=hungary default-forwarding=no disabled=no frequency=2462 mode=ap-bridge security-profile=wpa2 ssid=RLAN station-roaming=enabled wireless-protocol=unspecified /interface wireless nstreme set wlan1 comment="USER AG KORSUGARZO" /interface wireless manual-tx-power-table set wlan1 comment="USER AG KORSUGARZO" /interface wireless add comment="HOTSPOT USER AG" default-forwarding=no disabled=no mac-address=DA:5D:4C:8A:29:7F master-interface=wlan1 name=wlan-hotspot ssid=FERTOSZEPLAK station-roaming=enabled wds-cost-range=0 wds-default-cost=0 /interface wireless nstreme set *1E comment="HOTSPOT USER AG" /interface wireless manual-tx-power-table set wlan-hotspot comment="HOTSPOT USER AG" /ip hotspot profile add dns-name=fertoszeplak.rlan.hu hotspot-address=10.5.50.1 http-cookie-lifetime=3h http-proxy=0.0.0.0:3128 name=hsprof1 radius-interim-update=5m rate-limit=3m/3m smtp-server=86.109.64.10 use-radius=yes /ip hotspot user profile set [ find default=yes ] mac-cookie-timeout=6h shared-users=unlimited /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /ip pool add name=dhcp_pool1 ranges=10.0.0.100-10.0.0.200 add name=hs-pool-30 ranges=10.5.50.2-10.5.50.254 /ip dhcp-server add address-pool=hs-pool-30 authoritative=after-2sec-delay disabled=no interface=wlan-hotspot lease-time=1h name=dhcp1 /ip hotspot add address-pool=hs-pool-30 disabled=no interface=wlan-hotspot name=hotspot1 profile=hsprof1 /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet-default set ether3 queue=ethernet-default /snmp community set [ find default=yes ] addresses=86.109.64.0/27 write-access=yes /system logging action set 0 memory-lines=100 set 1 disk-lines-per-file=100 set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge1 hw=no interface=ether1 add bridge=bridge1 hw=no interface=ether2 add bridge=bridge1 hw=no interface=ether3 add bridge=bridge1 interface=wlan1 /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-vlan=yes /ip firewall connection tracking set enabled=yes tcp-established-timeout=6h /ip neighbor discovery-settings set discover-interface-list=discover /interface list member add interface=ether1 list=discover add interface=ether2 list=discover add interface=ether3 list=discover add list=discover add list=discover add interface=bridge1 list=discover add interface=wlan-hotspot list=discover add list=discover add interface=wlan3 list=discover /ip address add address=10.99.101.14/24 interface=bridge1 network=10.99.101.0 add address=10.99.101.15/24 interface=bridge1 network=10.99.101.0 add address=10.5.50.1/24 comment="hotspot network" interface=wlan-hotspot network=10.5.50.0 add address=86.109.66.38/30 comment="FERTOSZEPLAK HOTSPOT" interface=bridge1 network=86.109.66.36 /ip dhcp-server network add address=10.5.50.0/24 comment="hotspot network" gateway=10.5.50.1 /ip dns set allow-remote-requests=yes max-udp-packet-size=512 servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ez torolheto" list=support add address=192.168.88.0/24 list=support #error exporting /ip firewall calea /ip firewall filter add action=passthrough chain=unused-hs-chain comment="place hotspot rules here" disabled=yes add action=accept chain=input dst-port=21-23 protocol=tcp src-address=10.0.0.0/8 add action=accept chain=input dst-port=21-23 protocol=tcp src-address=86.109.64.0/19 add action=drop chain=input dst-port=21-23 protocol=tcp add action=drop chain=input dst-port=53 in-interface=!wlan-hotspot protocol=tcp add action=drop chain=input dst-port=53 in-interface=!wlan-hotspot protocol=udp add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000 add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related add action=accept chain=forward connection-state=established,related /ip firewall nat add action=passthrough chain=unused-hs-chain comment="place hotspot rules here" disabled=yes add action=masquerade chain=srcnat comment="masquerade hotspot network" src-address=10.5.50.0/24 /ip hotspot user add name=admin password=draytek99 add disabled=yes name=wifi password=free /ip hotspot walled-garden add dst-host=*.rlan.hu server=hotspot1 add dst-host=*.fertoszeplak.hu server=hotspot1 /ip ipsec policy set 0 dst-address=0.0.0.0/0 src-address=0.0.0.0/0 /ip proxy set cache-path=web-proxy1 enabled=yes max-cache-size=none parent-proxy=0.0.0.0 port=3128 src-address=86.109.66.38 /ip proxy access add src-address=10.5.50.0/24 add action=deny /ip route add distance=1 gateway=86.109.66.37 add distance=10 gateway=10.99.101.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /radius add address=86.109.64.21 secret=TiToK999 service=hotspot timeout=3s /snmp set contact=admin@rlan.hu enabled=yes location=Fertoszeplak trap-version=2 /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=gw-fertoszeplak /system logging add action=remote topics=critical,error,warning,info add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 server-dns-names=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=jan/17/2014 start-time=15:52:04 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set auto-send-supout=yes send-email-from=gw-fertoszeplak@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 /tool bandwidth-server set max-sessions=10 /tool e-mail set address=86.109.64.10 from=gw-fertoszeplak@magicnet.hu /tool graphing interface add /tool graphing resource add