# model: CubeG-5ac60ad # serial-number: HCS086RBV8A # firmware-type: ipq4000L # current-firmware: 7.11.2 # installed-version: 7.12.1 # Flags: U - UNDOABLE # Columns: ACTION, BY, POLICY, TIME # ACTION BY POLICY TIME # U user mentes added admin write 2024-08-02 12:42:07 # policy # U user group backup added admin write 2024-08-02 12:42:07 # policy # # software id = 48D1-MNUL # # model = CubeG-5ac60ad # serial number = HCS086RBV8A /interface bridge add admin-mac=18:FD:74:43:88:2E auto-mac=no name=bridge add name=bridge-vlan2816 /interface ethernet set [ find default-name=ether1 ] l2mtu=1620 mtu=1600 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX country=no_country_set disabled=no frequency=auto frequency-mode=superchannel mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled scan-list=5000-6000 ssid=RLAN_HAKO wireless-protocol=nv2 /interface w60g set [ find ] disabled=no mode=station-bridge name=wlan60-1 password=dsjnf999 region=no-region-set scan-list=60480,62640,64800,66000 ssid=RLAN_HAKO /interface bonding add mode=active-backup name=bond1 primary=wlan60-1 slaves=wlan60-1,wlan1 /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa2-psk comment=defconf disable-pmkid=yes mode=dynamic-keys supplicant-identity=MikroTik wpa2-pre-shared-key=776e-1f85 /port set 0 name=serial0 /ppp profile add bridge=bridge-vlan2816 name=l2tp /interface l2tp-client add allow-fast-path=yes connect-to=86.109.64.70 disabled=no mrru=1600 name=l2tp-budapest password=JIO8HUHI2d3d3 profile=l2tp user=kapuvartersegi /queue simple add burst-limit=110M/110M burst-threshold=90M/90M burst-time=1m/1m max-limit=100M/100M name=Iskola target=ether1 /routing bgp template set default disabled=no output.network=bgp-networks /routing ospf instance add disabled=no name=default-v2 /routing ospf area add disabled=yes instance=default-v2 name=backbone-v2 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api" #error exporting "/interface/bridge/calea" /interface bridge port add bridge=bridge-vlan2816 ingress-filtering=no interface=ether1 add bridge=bridge ingress-filtering=no interface=bond1 /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-vlan=yes /ipv6 settings set disable-ipv6=yes max-neighbor-entries=8192 /interface ovpn-server server set auth=sha1,md5 /ip address add address=10.96.52.11/24 interface=bond1 network=10.96.52.0 /ip dns set servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ez torolheto" list=support add address=192.168.88.0/24 list=support #error exporting "/ip/firewall/calea" /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000 add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes add action=accept chain=forward connection-state=established,related /ip route add disabled=no dst-address=0.0.0.0/0 gateway=10.96.52.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /snmp set contact=admin@rlan.hu enabled=yes location=Kapuvar /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-kossuth9-hansag /system logging add action=remote topics=info add action=remote topics=error add action=remote topics=critical add action=remote topics=warning /system note set show-at-login=no /system ntp client set enabled=yes /system ntp client servers add address=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2021-05-19 start-time=10:10:51 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /tool e-mail set from=gw-kossuth9-hansag@magicnet.hu server=86.109.64.10 /tool graphing interface add /tool graphing queue add /tool graphing resource add