# model: SXT G-2HnD # serial-number: 61B405B1542F # firmware-type: ar7240 # current-firmware: 3.33 # installed-version: 6.49.2 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # U user mentes added admin write # policy # U user group backup added admin write # policy # U device changed admin write # U item changed admin write # U changed snmp settings admin write # U ip service changed admin write # U ip service changed admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U filter rule added admin write # U address list entry added admin write # U address list entry added admin write # U address list entry added admin write # U address list entry added admin write # U filter rule removed admin write # U filter rule removed admin write # U filter rule removed admin write # U filter rule removed admin write # # software id = LC9Y-6NLC # # model = SXT G-2HnD # serial number = 61B405B1542F /interface bridge add fast-forward=no name=bridge1 /interface ethernet set [ find default-name=ether1 ] speed=100Mbps /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wlan1 supplicant-identity="" wpa2-pre-shared-key=RLANRLAN add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wlan2 supplicant-identity="" wpa2-pre-shared-key=RLAN_HANSAG2 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-b/g/n comment=RLAN country=no_country_set disabled=no frequency=2417 frequency-mode=superchannel mode=ap-bridge security-profile=wlan1 ssid=RLAN station-roaming=enabled wireless-protocol=802.11 add comment=RLAN_HANSAG2 keepalive-frames=disabled mac-address=E6:8D:8C:EA:FC:79 master-interface=wlan1 multicast-buffering=disabled name=wlan2 security-profile=wlan2 ssid=RLAN_HANSAG2 wds-cost-range=0 wds-default-cost=0 wps-mode=disabled /interface wireless nstreme set wlan1 comment=RLAN set *4 comment=RLAN_HANSAG2 /interface wireless manual-tx-power-table set wlan1 comment=RLAN set wlan2 comment=RLAN_HANSAG2 /ip ipsec proposal set [ find default=yes ] enc-algorithms=aes-128-cbc /ip pool add name=dhcp_pool1 ranges=192.168.0.100-192.168.0.254 /ip dhcp-server add address-pool=dhcp_pool1 authoritative=after-2sec-delay interface=bridge1 lease-time=2h name=dhcp1 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan1 add bridge=bridge1 interface=wlan2 /ip neighbor discovery-settings set discover-interface-list=!dynamic /ip address add address=10.96.50.4/24 interface=bridge1 network=10.96.50.0 /ip dhcp-server network add address=192.168.0.0/24 gateway=192.168.0.1 /ip dns set servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip firewall nat add action=src-nat chain=srcnat disabled=yes src-address=192.168.0.0/24 to-addresses=86.109.67.10 add action=dst-nat chain=dstnat disabled=yes dst-port=8000 in-interface=wlan2 protocol=tcp to-addresses=192.168.0.2 to-ports=8291 /ip route add distance=1 gateway=10.96.50.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /snmp set contact=admin@rlan.hu enabled=yes location=Kapuvar /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-hansag-userag /system leds set 0 interface=wlan1 /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=jun/29/2018 start-time=10:09:52 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n\r\n" /system watchdog set auto-send-supout=yes send-email-from=gw-marketparizsiudvar@magicnet.hu send-email-to=magic@magicnet.h send-smtp-server=86.109.64.10 /tool e-mail set address=86.109.64.10 from=gw-hansag-userag@magicnet.hu /tool graphing interface add /tool graphing queue add /tool graphing resource add