# model: RBD52G-5HacD2HnD # serial-number: E5780E00CFBF # firmware-type: ipq4000L # current-firmware: 6.47.9 # installed-version: 6.49.14 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = 34VK-DWM1 # # model = RBD52G-5HacD2HnD # serial number = E5780E00CFBF /interface bridge add name=bridge-management add name=bridge-vlan2805-Erzsebet64 add name=bridge-vlan2806-Erzsebet13 /interface ethernet set [ find default-name=ether1 ] comment=Uplink set [ find default-name=ether2 ] comment="Erzsebet 64. Ped. Szakszolg" l2mtu=1620 mtu=1600 set [ find default-name=ether3 ] comment="Erzsebet 13. Timaffy Muveszeti Iskola" l2mtu=1620 mtu=1600 set [ find default-name=ether4 ] comment=Rabatamasi l2mtu=1620 mtu=1600 set [ find default-name=ether5 ] comment="User ag, Tarnokreti, Bosarkany, Bagyogszovat" /interface vlan add interface=ether1 name=vlan300-bagyogszovat vlan-id=300 add interface=ether1 name=vlan301-bosarkany vlan-id=301 add interface=ether2 mtu=1600 name=vlan2805 vlan-id=2805 add interface=ether4 mtu=1600 name=vlan2805-budapestfele vlan-id=2805 add interface=ether3 mtu=1600 name=vlan2806 vlan-id=2806 add interface=ether4 mtu=1600 name=vlan2806-budapestfele vlan-id=2806 /interface list add name=discovery /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=dsjnf999 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment="Management 2.4GHz" country=no_country_set disabled=no frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11 set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="Management 5GHz" country=no_country_set disabled=no frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11 /interface wireless manual-tx-power-table set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /interface wireless nstreme set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /ip pool add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254 add name=GW-CSORNA.MAGICNET.HU/PPPOE/1 ranges=86.109.76.1-86.109.76.31 add name=TARTOZOK ranges=192.168.246.0/24 /ip dhcp-server add address-pool=dhcp_pool0 disabled=no interface=bridge-management name=dhcp1 /ppp profile set *0 change-tcp-mss=no dns-server=86.109.64.5,86.109.64.66 local-address=10.96.5.10 only-one=yes rate-limit=64k remote-address=GW-CSORNA.MAGICNET.HU/PPPOE/1 use-compression=yes use-encryption=yes /queue simple add burst-limit=30M/120M burst-threshold=22M/90M burst-time=1m/1m max-limit=25M/100M name="KIFU Erzsbet64 Ped. Szakszol" target=vlan2805 add burst-limit=30M/120M burst-threshold=22M/90M burst-time=1m/1m max-limit=25M/100M name="KIFI Erzsebet13 Timaffy Iskola" target=vlan2806 /routing ospf area add area-id=0.0.0.246 name=pppoe246 /routing ospf instance set [ find default=yes ] metric-bgp=20 redistribute-connected=as-type-1 router-id=10.96.5.10 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge-management interface=wlan1 add bridge=bridge-management interface=wlan2 add bridge=bridge-vlan2805-Erzsebet64 interface=vlan2805 add bridge=bridge-vlan2805-Erzsebet64 interface=vlan2805-budapestfele add bridge=bridge-vlan2806-Erzsebet13 interface=vlan2806 add bridge=bridge-vlan2806-Erzsebet13 interface=vlan2806-budapestfele /ip neighbor discovery-settings set discover-interface-list=discovery /interface list member add interface=ether1 list=discovery add interface=ether2 list=discovery add interface=ether3 list=discovery add interface=ether4 list=discovery add interface=ether5 list=discovery add interface=wlan1 list=discovery add interface=wlan2 list=discovery add interface=vlan300-bagyogszovat list=discovery add interface=vlan301-bosarkany list=discovery /interface pppoe-server server add disabled=no interface=ether5 one-session-per-host=yes service-name=rlan add disabled=no interface=ether1 service-name=rlan add disabled=no interface=vlan300-bagyogszovat one-session-per-host=yes service-name=rlan add disabled=no interface=vlan301-bosarkany one-session-per-host=yes service-name=rlan /ip address add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0 add address=10.96.150.1/24 interface=ether5 network=10.96.150.0 add address=10.96.151.1/24 interface=vlan300-bagyogszovat network=10.96.151.0 add address=10.96.153.1/24 interface=vlan301-bosarkany network=10.96.153.0 add address=10.96.5.10/24 interface=ether1 network=10.96.5.0 add address=10.96.154.1/24 interface=ether2 network=10.96.154.0 add address=10.96.155.1/24 interface=ether3 network=10.96.155.0 add address=10.96.156.1/24 interface=ether4 network=10.96.156.0 add address=10.96.158.1/24 interface=ether4 network=10.96.158.0 /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 /ip dns set servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=accept chain=forward comment="TARTOZOK POP3 atengedese mail.rlan.hu-ra" connection-mark=tartozo dst-address=86.109.64.10 dst-port=110 protocol=tcp add action=accept chain=forward comment="TARTOZOK DNS atengedese" connection-mark=tartozo dst-port=53 protocol=udp add action=accept chain=forward comment="TARTOZOK WEB atengedese NAT-hoz" connection-mark=tartozo dst-port=80 protocol=tcp add action=accept chain=forward comment="TARTOZOK PROXY atengedese NAT-hoz" connection-mark=tartozo dst-port=3128 protocol=tcp add action=drop chain=forward comment="TARTOZOK Minden eldobalasa" connection-mark=tartozo src-address=192.168.246.0/24 /ip firewall mangle add action=mark-connection chain=prerouting comment="Tartozok megjelolese" new-connection-mark=tartozo passthrough=yes src-address=192.168.246.0/24 /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.88.0/24 add action=netmap chain=dstnat comment="TARTOZOK WEB atiranyitas" connection-mark=tartozo dst-port=80 protocol=tcp to-addresses=86.109.64.19 to-ports=80 add action=netmap chain=dstnat comment="TARTOZOK proxy atiranyitas" connection-mark=tartozo dst-port=3128 protocol=tcp to-addresses=86.109.64.19 to-ports=80 /ip route add distance=200 gateway=10.96.5.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ppp aaa set interim-update=5m use-radius=yes /ppp profile add bridge=*B name=l2tp /radius add address=86.109.64.22 secret=TiToK345 service=ppp add address=86.109.64.14 secret=TiToK345 service=ppp /radius incoming set accept=yes port=1700 /routing filter add action=discard chain=ospf-out prefix=192.168.88.0/24 prefix-length=24 /routing ospf area range add area=pppoe246 range=86.109.76.0/27 add area=pppoe246 range=192.168.246.0/24 /routing ospf interface add network-type=broadcast passive=yes add interface=ether1 network-type=broadcast /routing ospf network add area=pppoe246 network=86.109.76.0/27 add area=pppoe246 network=192.168.246.0/24 add area=backbone network=10.96.5.0/24 /snmp set contact=admin@rlan.hu enabled=yes location=Csorna /system clock set time-zone-name=Europe/Budapest /system identity set name=GW-CSORNA.MAGICNET.HU /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes server-dns-names=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=jan/02/1970 start-time=05:25:55 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set ping-start-after-boot=55m watch-address=10.96.5.1 /tool e-mail set address=86.109.64.10 from=gw-csorna@magicnet.hu /tool graphing interface add /tool graphing queue add /tool graphing resource add