# model: 433 # serial-number: 20A9019A499C # firmware-type: ar7100 # current-firmware: 3.41 # installed-version: 6.49.6 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = CD46-YQSK # # model = 433 # serial number = 20A9019A499C /interface wireless set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-b/g basic-rates-b="" comment="USER AG 2 csak G mod TPLINK" country=no_country_set default-forwarding=no disabled=no frequency=2412 frequency-mode=superchannel mode=ap-bridge nv2-preshared-key=RLAN_TPSZT2 nv2-security=enabled ssid=RLAN_TPSZT2 station-roaming=enabled supported-rates-b="" wireless-protocol=nv2 /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="HIBAS PORT" set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="UPLINK, Tap iskola" set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="TAPTSZ LINK" /interface wireless nstreme set wlan2 comment="USER AG 2 csak G mod TPLINK" /interface wireless manual-tx-power-table set wlan2 comment="USER AG 2 csak G mod TPLINK" /interface list add exclude=dynamic name=discover /interface wireless security-profiles set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers="" add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wlan3 supplicant-identity="" wpa2-pre-shared-key=RLAN_TPSZTNY add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wlan2 supplicant-identity="" wpa2-pre-shared-key=RLAN_TPSZT2 add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wlan1 supplicant-identity="" wpa2-pre-shared-key=RLAN96_TPSZT /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-b comment="HIBAS KARTYA ----------USERAG 1 CSAK B mod TPLINK PCI 54 Mb" country=hungary default-forwarding=no frequency=2427 mode=ap-bridge security-profile=wlan1 ssid=RLAN96_TPSZT station-roaming=enabled wireless-protocol=unspecified add default-forwarding=no mac-address=02:0C:42:0C:66:59 master-interface=wlan1 name=wlan1-noWPA ssid=RLAN96_TPSZT station-roaming=enabled wds-cost-range=0 wds-default-cost=0 set [ find default-name=wlan3 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b basic-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps comment="USER AG 180FOK TAP ES GYORASSZONYFA" country=no_country_set default-forwarding=no disabled=no frequency=2462 frequency-mode=superchannel mode=ap-bridge rate-set=configured security-profile=wlan3 ssid=RLAN_TPSZTNY station-roaming=enabled wireless-protocol=unspecified /interface wireless nstreme set wlan1 comment="HIBAS KARTYA ----------USERAG 1 CSAK B mod TPLINK PCI 54 Mb" set wlan3 comment="USER AG 180FOK TAP ES GYORASSZONYFA" /interface wireless manual-tx-power-table set wlan1 comment="HIBAS KARTYA ----------USERAG 1 CSAK B mod TPLINK PCI 54 Mb" set wlan3 comment="USER AG 180FOK TAP ES GYORASSZONYFA" /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /ip pool add name=GW-TAPSZENTMIKLOS.MAGICNET.HU/PPPOE/1 ranges=86.109.70.96/27 add name=TARTOZOK ranges=192.168.241.0/24 /ppp profile set *0 dns-server=86.109.64.5,86.109.64.66 local-address=86.109.64.241 only-one=yes rate-limit=64k remote-address=GW-TAPSZENTMIKLOS.MAGICNET.HU/PPPOE/1 /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet-default set ether3 queue=ethernet-default /routing ospf area add area-id=0.0.0.241 name=pppoe241 add area-id=0.0.1.1 name=area-0.0.1.1 /routing ospf instance set [ find default=yes ] redistribute-connected=as-type-1 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 add addresses=86.109.64.14/32 name=partnerlogin /system logging action set 0 memory-lines=400 set 1 disk-lines-per-file=100 set 3 remote=86.109.64.16 /user group set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp" add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /ip neighbor discovery-settings set discover-interface-list=all /interface list member add interface=ether1 list=discover add interface=ether2 list=discover add interface=ether3 list=discover add interface=wlan1 list=discover add interface=wlan2 list=discover add interface=wlan3 list=discover add list=discover /interface pppoe-server server add disabled=no interface=ether1 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=ether2 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=ether3 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=wlan1 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=wlan2 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=wlan3 max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no interface=wlan1-noWPA max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no max-mru=1480 max-mtu=1480 one-session-per-host=yes service-name=rlan add disabled=no max-mru=1480 max-mtu=1480 service-name=rlan /ip address add address=86.109.64.241 interface=ether2 network=86.109.64.241 add address=10.96.4.1/24 interface=ether3 network=10.96.4.0 add address=10.96.15.10/24 interface=ether2 network=10.96.15.0 add address=10.96.27.1/24 interface=ether2 network=10.96.27.0 add address=10.96.27.2/24 interface=ether2 network=10.96.27.0 add address=10.96.12.1/24 interface=ether2 network=10.96.12.0 /ip dhcp-server network add address=192.168.2.0/24 dns-server=86.109.64.5,193.194.159.224 gateway=192.168.2.1 /ip dns set max-udp-packet-size=512 servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=forward comment="TARTOZOK POP3 atengedese mail.rlan.hu-ra" connection-mark=tartozo dst-address=86.109.64.10 dst-port=110 protocol=tcp add action=accept chain=forward comment="TARTOZOK DNS atengedese" connection-mark=tartozo dst-port=53 protocol=udp add action=accept chain=forward comment="TARTOZOK WEB atengedese NAT-hoz" connection-mark=tartozo dst-port=80 protocol=tcp add action=accept chain=forward comment="TARTOZOK PROXY atengedese NAT-hoz" connection-mark=tartozo dst-port=3128 protocol=tcp add action=drop chain=forward comment="TARTOZOK Minden eldobalasa" connection-mark=tartozo src-address=192.168.241.0/24 add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip firewall mangle add action=change-dscp chain=prerouting new-dscp=4 passthrough=yes src-address=86.109.64.18 add action=change-dscp chain=prerouting dst-address=86.109.64.18 new-dscp=4 passthrough=yes add action=change-mss chain=forward comment="TCP MSS beallitas" new-mss=1440 passthrough=yes protocol=tcp tcp-flags=syn tcp-mss=!536-1460 add action=change-mss chain=forward comment="TCP MSS beallitas" new-mss=1440 passthrough=yes protocol=tcp tcp-flags=syn tcp-mss=1453-65535 add action=change-mss chain=forward comment="TCP MSS beallitas" new-mss=clamp-to-pmtu passthrough=yes protocol=tcp tcp-flags=syn add action=mark-connection chain=prerouting comment="Tartozok megjelolese" new-connection-mark=tartozo passthrough=yes src-address=192.168.241.0/24 /ip firewall nat add action=masquerade chain=srcnat dst-address=10.96.4.0/24 src-address=10.0.0.0/24 add action=netmap chain=dstnat comment="TARTOZOK WEB atiranyitas" connection-mark=tartozo dst-port=80 protocol=tcp to-addresses=86.109.64.19 to-ports=80 add action=netmap chain=dstnat comment="TARTOZOK proxy atiranyitas" connection-mark=tartozo dst-port=3128 protocol=tcp to-addresses=86.109.64.19 to-ports=80 /ip proxy set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0 /ip route add check-gateway=ping distance=200 gateway=10.96.15.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /ppp aaa set interim-update=5m use-radius=yes /radius add address=86.109.64.22 secret=TiToK345 service=ppp add address=86.109.64.14 secret=TiToK345 service=ppp /radius incoming set accept=yes port=1700 /routing ospf area range add area=pppoe241 range=86.109.70.96/27 add area=pppoe241 range=192.168.241.0/24 /routing ospf interface add interface=ether2 network-type=broadcast add network-type=broadcast passive=yes /routing ospf network add area=pppoe241 network=86.109.64.241/32 add area=pppoe241 network=192.168.241.0/24 add area=pppoe241 network=86.109.70.96/27 add area=backbone network=10.96.15.0/24 /snmp set contact=magic@magicnet.hu enabled=yes location=Tapszentmiklos trap-target=0.0.0.0 /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=GW-TAPSZENTMIKLOS.MAGICNET.HU /system logging add disabled=yes topics=wireless add disabled=yes topics=radius add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=may/13/2013 start-time=07:01:46 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set auto-send-supout=yes ping-start-after-boot=1h send-email-from=gw-tapszentmiklos@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 watch-address=10.96.15.7 /tool e-mail set address=86.109.64.10 from=gw-tapszentmiklos@magicnet.hu /tool graphing interface add /tool graphing queue add /tool graphing resource add