#              model: 433
#      serial-number: 3655022F8F68
#      firmware-type: ar7100
#   current-firmware: 6.49.11
#   installed-version: 6.49.11
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# U ip service changed                       admin            write              
# U ip service changed                       admin            write              
# U ip service changed                       admin            write              
# 
# software id = 90H1-69WI
#
# model = 433
# serial number = 3655022F8F68
/interface ethernet
set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="Uplink Ecs"
set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="ARAMSZUNET FIGYELO"
set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="IVONE LINK"
/interface bridge
add fast-forward=no mtu=1500 name=bridge1
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode comment=URES country=uzbekistan disabled=no frequency=5540 frequency-mode=superchannel mode=bridge nv2-preshared-key=dsjnf999 nv2-security=enabled scan-list=5000-6000 ssid=RLAN_NYHD station-roaming=enabled wds-default-bridge=bridge1 wds-mode=dynamic wireless-protocol=nv2
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode comment="Nincs antenna rajta" country=uzbekistan frequency-mode=manual-txpower mode=station-bridge name=wlan3 nv2-preshared-key=dsjnf999 nv2-security=enabled radio-name=Nyuldomb ssid=RLAN_ECSNY station-roaming=enabled
/interface wireless nstreme
set wlan1 comment=URES enable-nstreme=yes framer-policy=dynamic-size
set wlan3 comment="Nincs antenna rajta" enable-nstreme=yes
/interface wireless manual-tx-power-table
set wlan1 comment=URES
set wlan3 comment="Nincs antenna rajta"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wlan2 supplicant-identity="" wpa2-pre-shared-key=RLAN_NYUL
/interface wireless
set [ find default-name=wlan3 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment="USER AG" country=hungary disabled=no mode=ap-bridge name=wlan2 security-profile=wlan2 ssid=RLAN_NYUL station-roaming=enabled
/interface wireless nstreme
set wlan2 comment="USER AG"
/interface wireless manual-tx-power-table
set wlan2 comment="USER AG"
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
add addresses=86.109.64.14/32 name=partnerlogin
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 hw=no interface=ether1
add bridge=bridge1 hw=no interface=ether2
add bridge=bridge1 hw=no interface=ether3
add bridge=bridge1 interface=wlan2
add bridge=bridge1 interface=wlan3
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=10.96.3.10/24 interface=bridge1 network=10.96.3.0
add address=10.96.3.11/24 interface=bridge1 network=10.96.3.0
/ip dns
set servers=86.109.64.5
#error exporting /ip firewall calea
/ip proxy
set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0
/ip route
add distance=1 gateway=10.96.3.1
/ip service
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip ssh
set forwarding-enabled=remote
/snmp
set contact=magic@magicnet.hu enabled=yes location=Nyul
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Budapest
/system identity
set name=gw-nyul
/system logging
add action=remote topics=info,critical,error,warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system routerboard settings
set auto-upgrade=yes
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=oct/28/2013 start-time=10:35:12
/system script
add dont-require-permissions=no name=mentes owner=root policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/system watchdog
set auto-send-supout=yes ping-start-after-boot=55m send-email-from=gw-nyul@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 watch-address=10.96.3.1
/tool e-mail
set address=86.109.64.10 from=gw-nyul@magicnet.hu
/tool graphing interface
add
/tool graphing resource
add