#              model: RouterBOARD LHG G-5acD-XL
#      serial-number: 80BA085EDB56
#      firmware-type: ipq4000L
#   current-firmware: 6.48.1
#   installed-version: 6.49.7
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# 
# software id = H22Q-4CFQ
#
# model = RouterBOARD LHG G-5acD-XL
# serial number = 80BA085EDB56
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-gain=0 band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX country=no_country_set disabled=no frequency=auto frequency-mode=superchannel installation=any mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled radio-name=Ecs scan-list=5000-6000 ssid=gye station-roaming=enabled wireless-protocol=nv2-nstreme
/interface bridge
add name=bridge1
/interface wireless nstreme
set wlan1 enable-nstreme=yes
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp"
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=10.96.29.6/24 interface=bridge1 network=10.96.29.0
/ip dns
set servers=86.109.64.5
#error exporting /ip firewall calea
/ip route
add distance=1 gateway=10.96.29.1
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/snmp
set contact=admin@rlan.hu enabled=yes location=Ecs
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-ecs-gyor
/system logging
add action=remote topics=info
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=oct/14/2019 start-time=12:23:06
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc"
/system watchdog
set ping-start-after-boot=55m watch-address=10.96.29.5
/tool e-mail
set address=86.109.64.10 from=gw-ecs-gyor@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add