#              model: RBD52G-5HacD2HnD
#      serial-number: D7160D1B5979
#      firmware-type: ipq4000L
#   current-firmware: 6.48.1
#   installed-version: 6.49.5
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# 
# software id = Y165-K95Q
#
# model = RBD52G-5HacD2HnD
# serial number = D7160D1B5979
/interface bridge
add name=bridge-management
add name=bridge1
/interface ethernet
set [ find default-name=ether1 ] comment=Arpas
set [ find default-name=ether2 ] comment=Egyhazaskeszo
set [ find default-name=ether3 ] comment=Felpec
set [ find default-name=ether4 ] comment=Switch full-duplex=no speed=10Mbps
set [ find default-name=ether5 ] comment="Aramszunet figyelo"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2-management supplicant-identity="" wpa2-pre-shared-key=dsjnf999
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment="Management 2.4GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2-management ssid=RLAN_MNGMNT wireless-protocol=802.11
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="Management 5GHz" country=no_country_set disabled=no frequency-mode=superchannel mode=ap-bridge scan-list=5000-6000 security-profile=wpa2-management ssid=RLAN_MNGMNT wireless-protocol=802.11
/interface wireless manual-tx-power-table
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5GHz"
/interface wireless nstreme
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5GHz"
/ip pool
add name=GW-TET.MAGICNET.HU/PPPOE1 ranges=86.109.76.129-86.109.76.190
add name=TARTOZOK ranges=192.168.251.0/24
add name=dhcp_pool2 ranges=192.168.88.2-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool2 disabled=no interface=bridge-management name=dhcp1
/ppp profile
set *0 dns-server=86.109.64.5,86.109.64.66 local-address=86.109.64.251 only-one=yes rate-limit=20k remote-address=GW-TET.MAGICNET.HU/PPPOE1
/queue simple
add limit-at=100M/100M max-limit=100M/100M name="KIFU Gyomore Iskola" target=86.109.69.42/32
/routing ospf area
add area-id=0.0.0.251 name=pppoe251
/routing ospf instance
set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp"
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether4
add bridge=bridge-management interface=wlan1 multicast-router=disabled
add bridge=bridge-management interface=wlan2 multicast-router=disabled
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface pppoe-server server
add disabled=no interface=bridge1 one-session-per-host=yes service-name=rlan
/ip address
add address=10.96.102.1/24 interface=bridge1 network=10.96.102.0
add address=10.89.8.14/24 interface=ether2 network=10.89.8.0
add address=10.96.103.8/24 interface=ether1 network=10.96.103.0
add address=10.96.104.1/24 interface=bridge1 network=10.96.104.0
add address=86.109.64.251 interface=bridge1 network=86.109.64.251
add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0
add address=10.96.103.1/24 comment="EZT kell torolni ha elindul csorna link" disabled=yes interface=ether1 network=10.96.103.0
/ip dhcp-server network
add address=192.168.88.0/24 dns-server=86.109.64.5,86.109.64.66 gateway=192.168.88.1
/ip dns
set servers=86.109.64.5
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip firewall nat
add action=masquerade chain=srcnat comment=Management src-address=192.168.88.0/24
/ip route
add check-gateway=ping disabled=yes distance=100 gateway=10.89.8.1
add comment="KIFU Gyomore Iskola" distance=1 dst-address=86.109.69.40/30 gateway=10.96.102.25
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27,10.0.0.2/32
set api-ssl address=86.109.64.0/27
/ppp aaa
set interim-update=5m use-radius=yes
/radius
add address=86.109.64.22 secret=TiToK345 service=ppp timeout=3s
add address=86.109.64.14 secret=TiToK345 service=ppp timeout=3s
add address=10.0.0.2 secret=TiToK345 service=ppp timeout=3s
/radius incoming
set accept=yes port=1700
/routing filter
add action=discard chain=ospf-out prefix=192.168.88.0/24 prefix-length=24
/routing ospf area range
add area=pppoe251 range=86.109.76.128/26
add area=pppoe251 range=192.168.251.0/24
/routing ospf interface
add interface=ether1
add interface=ether2
add passive=yes
/routing ospf network
add area=backbone network=10.89.8.0/24
add area=backbone network=10.96.103.0/24
add area=pppoe251 network=86.109.76.128/26
add area=pppoe251 network=192.168.251.0/24
/snmp
set contact=admin@rlan.hu enabled=yes location=Tet
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=GW-TET.MAGICNET.HU
/system logging
add action=remote topics=info
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=warning
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system routerboard settings
set cpu-frequency=896MHz
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=may/26/2020 start-time=11:04:10
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/tool e-mail
set address=86.109.64.10 from=gw-tet@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add