# model: 333 # serial-number: 179801C1AE79 # firmware-type: mpc8323 # current-firmware: 6.45.6 # installed-version: 6.49.6 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # U user mentes added admin write # policy # U user group backup added admin write # policy # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # U device changed admin write # # software id = W5FP-2378 # # model = 333 # serial number = 179801C1AE79 /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="UPLINK SZOLOHEGY" set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="DIGI LINK" set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=Aramszunet /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers="" add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wlan2 supplicant-identity="" wpa2-pre-shared-key=RLAN_SHD add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wlan3 supplicant-identity="" wpa2-pre-shared-key=RLAN_SHRLAN_SH /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b band=2ghz-onlyg basic-rates-b="" comment="Userag 1 TEWN56XG 180 fokos SK szektor DEL" country=no_country_set default-forwarding=no disabled=no frequency-mode=superchannel hw-retries=4 mode=ap-bridge name=wlan2 nv2-preshared-key=RLAN_SHD nv2-security=enabled security-profile=wlan2 ssid=RLAN_SHD station-roaming=enabled supported-rates-b="" wireless-protocol=nv2 add default-authentication=no default-forwarding=no mac-address=02:19:E0:83:09:1C master-interface=wlan2 name=wlan2-noWPA ssid=RLAN_SHD station-roaming=enabled wds-cost-range=0 wds-default-cost=0 set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-onlyg basic-rates-b="" comment="Userag 2 TE7WN56G antenna a dugo letorve 60 fokos flat ESZAK" country=no_country_set default-forwarding=no disabled=no frequency=2432 frequency-mode=superchannel mode=ap-bridge name=wlan3 nv2-preshared-key=RLAN_SHE nv2-security=enabled security-profile=wlan3 ssid=RLAN_SHE station-roaming=enabled supported-rates-b="" wireless-protocol=nv2 wps-mode=disabled add default-authentication=no default-forwarding=no mac-address=02:19:E0:82:FF:6E master-interface=wlan3 name=wlan3_noWPA ssid=RLAN_SH station-roaming=enabled wds-cost-range=0 wds-default-cost=0 add comment="IDEIGLENES USER AG TOROLNI KELL. AZ ACCESS LISTET IS HA AT LETTEK\_RAKVA AZ UGYFELEK" default-authentication=no default-forwarding=no mac-address=02:19:E0:83:09:1B master-interface=wlan2 name=wlan4 ssid=RLAN_SH station-roaming=enabled wds-cost-range=0 wds-default-cost=0 /interface wireless nstreme set wlan2 comment="Userag 1 TEWN56XG 180 fokos SK szektor DEL" set wlan3 comment="Userag 2 TE7WN56G antenna a dugo letorve 60 fokos flat ESZAK" set *A comment="IDEIGLENES USER AG TOROLNI KELL. AZ ACCESS LISTET IS HA AT LETTEK RAKVA AZ UGYFELEK" /interface wireless manual-tx-power-table set wlan2 comment="Userag 1 TEWN56XG 180 fokos SK szektor DEL" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40-7:0" set wlan3 comment="Userag 2 TE7WN56G antenna a dugo letorve 60 fokos flat ESZAK" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40-7:0" set wlan4 comment="IDEIGLENES USER AG TOROLNI KELL. AZ ACCESS LISTET IS HA AT LETTEK RAKVA AZ UGYFELEK" /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /port set 0 flow-control=hardware /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet-default set ether3 queue=ethernet-default /snmp community set [ find default=yes ] addresses=86.109.64.0/27 add addresses=86.109.64.0/27 name=partnerlogin add addresses=10.0.0.2/32 name=cljelszintmero /system logging action set 0 memory-lines=100 set 1 disk-lines-per-file=100 set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge1 interface=wlan3 add bridge=bridge1 interface=wlan4 add bridge=bridge1 interface=wlan2-noWPA add bridge=bridge1 interface=wlan3_noWPA add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=wlan2 add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether1 /ip neighbor discovery-settings set discover-interface-list=all /interface wireless access-list add disabled=yes interface=wlan4 mac-address=64:66:B3:FC:71:11 add disabled=yes interface=wlan4 mac-address=64:70:02:B9:D8:75 add interface=wlan2-noWPA mac-address=64:D1:54:1D:45:99 vlan-mode=no-tag add interface=wlan3_noWPA mac-address=00:17:B7:60:07:01 vlan-mode=no-tag /ip address add address=10.96.1.21/24 interface=ether1 network=10.96.1.0 add address=10.96.1.22/24 interface=ether1 network=10.96.1.0 add address=10.96.1.23/24 interface=ether1 network=10.96.1.0 /ip dns set max-udp-packet-size=512 servers=10.96.28.1,86.109.64.5 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip proxy set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0 /ip route add check-gateway=ping distance=1 gateway=10.96.1.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /snmp set contact=magic@magicnet.hu enabled=yes location=Sashegy trap-target=0.0.0.0 /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=gw-sashegy /system logging add disabled=yes topics=wireless add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 /system routerboard settings set cpu-frequency=333MHz /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=oct/25/2019 start-time=07:00:19 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n\r\n" /system upgrade upgrade-package-source add address=86.109.64.1 user=upgrade /system watchdog set auto-send-supout=yes ping-start-after-boot=55m send-email-from=gw-sashegy@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 watch-address=10.96.1.7 /tool bandwidth-server set max-sessions=10 /tool e-mail set address=86.109.64.10 from=gw-sashegy@magicnet.hu /tool graphing interface add /tool graphing resource add /tool sniffer set filter-interface=ether3 memory-limit=1000KiB