# model: 433 # serial-number: 21E001E53FA8 # firmware-type: ar7100 # current-firmware: 6.49.15 # installed-version: 6.49.15 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # U device changed admin write # U device changed admin write # # software id = 6H5I-MIF3 # # model = 433 # serial number = 21E001E53FA8 /interface wireless set [ find default-name=wlan3 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b comment="GYARMAT LINK 5220 brdige" country=no_country_set default-forwarding=no frequency=5200 frequency-mode=superchannel mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled scan-list=5000-6000 ssid=egy station-roaming=enabled wireless-protocol=nv2-nstreme /interface bridge add fast-forward=no mtu=1500 name=bridge-papa /interface ethernet set [ find default-name=ether1 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment=UPLINK mac-address=00:0C:42:55:68:28 set [ find default-name=ether2 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="CSIKVAND LINK" mac-address=00:0C:42:55:68:29 set [ find default-name=ether3 ] advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full comment="S&B LINK" mac-address=00:0C:42:55:68:2A speed=10Mbps /interface eoip add allow-fast-path=no clamp-tcp-mss=no !keepalive mac-address=02:D4:32:3D:E8:5D mtu=1600 name=eoip-papa remote-address=10.89.8.1 tunnel-id=2 /interface wireless nstreme set wlan3 comment="GYARMAT LINK 5220 brdige" enable-nstreme=yes framer-policy=dynamic-size /interface wireless manual-tx-power-table set wlan3 comment="GYARMAT LINK 5220 brdige" /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode comment=URES country=uzbekistan default-forwarding=no frequency=5320 frequency-mode=superchannel hw-retries=10 mode=bridge name=wlan2 radio-name=Egyhazakeszo scan-list=5000-6000 ssid=RLAN_EKVA station-roaming=enabled wds-default-bridge=bridge-papa wds-mode=dynamic wireless-protocol=nv2-nstreme /interface wireless nstreme set wlan2 comment=URES enable-nstreme=yes framer-policy=dynamic-size /interface wireless manual-tx-power-table set wlan2 comment=URES manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40-7:0" /interface wireless security-profiles set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik unicast-ciphers="" add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=RLAN2RLAN2 /interface wireless set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode antenna-mode=ant-b band=2ghz-b basic-rates-b=5.5Mbps comment="USER AG" country=hungary default-forwarding=no disabled=no frequency=2417 hw-retries=10 mode=ap-bridge name=wlan1 rate-set=configured security-profile=wpa2 ssid=RLAN2 station-roaming=enabled supported-rates-b=5.5Mbps,11Mbps wireless-protocol=802.11 /interface wireless nstreme set wlan1 comment="USER AG" /interface wireless manual-tx-power-table set wlan1 comment="USER AG" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40-7:0" /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /queue simple add limit-at=30M/30M max-limit=30M/30M name="S&B EGYHAZASKESZO" priority=1/1 target=86.109.66.98/32 add limit-at=15M/15M max-limit=15M/15M name="S&B Kamera" priority=1/1 target=86.109.66.99/32 add limit-at=128k/128k max-limit=128k/128k name="S&B Ures 100" priority=1/1 target=86.109.66.100/32 add limit-at=128k/128k max-limit=128k/128k name="S&B Ures 101" priority=1/1 target=86.109.66.101/32 add limit-at=128k/128k max-limit=128k/128k name="S&B Ures 102" priority=1/1 target=86.109.66.102/32 /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet-default set ether3 queue=ethernet-default /routing ospf instance set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 add addresses=86.109.64.14/32 name=partnerlogin /system logging action set 0 memory-lines=300 set 1 disk-lines-per-file=100 set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge-papa interface=wlan1 add bridge=bridge-papa hw=no interface=ether2 add bridge=bridge-papa interface=eoip-papa add bridge=bridge-papa interface=wlan3 /interface bridge settings set use-ip-firewall=yes /ip neighbor discovery-settings set discover-interface-list=!dynamic /ip address add address=10.96.101.1/24 interface=bridge-papa network=10.96.101.0 add address=10.96.111.1/24 interface=bridge-papa network=10.96.111.0 add address=10.96.112.1/24 disabled=yes interface=bridge-papa network=10.96.112.0 add address=10.96.101.6/24 interface=bridge-papa network=10.96.101.0 add address=86.109.66.97/29 comment="IMERSYS S&B" interface=ether3 network=86.109.66.96 add address=10.89.8.10/24 interface=ether1 network=10.89.8.0 /ip dns set max-udp-packet-size=512 servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ez torolheto" list=support add address=192.168.88.0/24 list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000 add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related protocol=tcp add action=accept chain=forward connection-state=established,related protocol=tcp /ip proxy set cache-path=web-proxy1 max-cache-size=none parent-proxy=0.0.0.0 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /routing ospf interface add network-type=broadcast passive=yes add interface=ether1 network-type=broadcast /routing ospf network add area=backbone network=10.89.8.0/24 /snmp set contact=magic@magicnet.hu enabled=yes location=Egyhazaskeszo trap-target=0.0.0.0 /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=gw-egyhazaskeszo /system logging add action=remote topics=info add action=remote topics=error add action=remote topics=critical add action=remote topics=warning add action=remote topics=info add action=remote topics=error add action=remote topics=critical add action=remote topics=warning /system ntp client set enabled=yes primary-ntp=86.109.64.5 server-dns-names=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=dec/21/2012 start-time=13:41:34 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n\r\n" /system watchdog set auto-send-supout=yes send-email-from=gw-egyhazaskeszo@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 /tool e-mail set address=86.109.64.10 from=gw-egyhazaskeszo@magicnet.hu /tool graphing interface add /tool graphing resource add