#              model: RBD52G-5HacD2HnD
#      serial-number: D7160DA8311F
#      firmware-type: ipq4000L
#   current-firmware: 6.47.8
#   installed-version: 6.49.11
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# U ip service changed                       admin            write              
# 
# software id = 8KTN-Z8T5
#
# model = RBD52G-5HacD2HnD
# serial number = D7160DA8311F
/interface bridge
add name=bridge-management
add fast-forward=no mtu=1500 name=bridge1
/interface ethernet
set [ find default-name=ether1 ] comment="DIGI UPLINK" speed=10Mbps
set [ find default-name=ether2 ] comment="JUTASI LINK"
set [ find default-name=ether3 ] comment=Gasztrohead
set [ find default-name=ether4 ] comment=Kormanyhivatal
set [ find default-name=ether5 ] comment="sw-cholnoky fele"
/interface pppoe-client
add add-default-route=yes default-route-distance=2 disabled=no interface=ether1 name=pppoe-out1 password=aK6uUJCN user=rxxcom-dch
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=dsjnf999
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment="Management 2.4GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="Management 5GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11
/interface wireless manual-tx-power-table
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5GHz"
/interface wireless nstreme
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5GHz"
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/ip pool
add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=bridge-management name=dhcp1
/interface l2tp-client
add connect-to=86.109.64.70 disabled=no mrru=1600 name=l2tp-budapest password=UvegJani75 profile=default user=veszprem
/queue simple
add limit-at=10M/10M max-limit=10M/10M name="DRAVANET FIDESZ VESZPREM" target=86.109.66.214/32
add comment="Lefel\E9 10 M lenne, de idegilenesen kapt\E1k a 20M-et mert felfel\E9 lassabb volt a vonal. Ha megy m\E1r akkor majd vissza kell \E1ll\EDtani a sebess\E9get." limit-at=10M/20M max-limit=10M/20M name="PRINTERFAIR Gasztro Head Veszprem" target=86.109.68.146/32
/routing ospf instance
set [ find default=yes ] redistribute-connected=as-type-1 router-id=10.250.0.130
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27,10.0.0.0/8
add addresses=86.109.64.14/32 name=partnerlogin
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
set 3 remote=86.109.64.16
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge1 hw=no interface=ether2
add bridge=bridge1 hw=no interface=ether3
add bridge=bridge1 hw=no interface=ether4
add bridge=bridge1 hw=no interface=ether5
add bridge=bridge-management interface=wlan1
add bridge=bridge-management interface=wlan2
/interface bridge settings
set use-ip-firewall=yes
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=10.88.1.1/24 interface=bridge1 network=10.88.1.0
add address=86.109.66.213/30 comment="Enternet Fidesz Veszprem" interface=bridge1 network=86.109.66.212
add address=86.109.68.145/30 comment="Printer Fair Gasztromhead" interface=bridge1 network=86.109.68.144
add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0
/ip dhcp-server network
add address=192.168.88.0/24 gateway=192.168.88.1
/ip dns
set servers=86.109.64.5,8.8.8.8
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input src-address=86.109.64.70
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
add action=fasttrack-connection chain=forward connection-state=established,related disabled=yes
add action=accept chain=forward connection-state=established,related disabled=yes
/ip firewall nat
add action=masquerade chain=srcnat comment=Management src-address=192.168.88.0/24
/ip proxy
set cache-path=web-proxy1
/ip route
add check-gateway=ping distance=1 gateway=10.250.0.129
add comment="Hajmasker eszkozok" disabled=yes distance=1 dst-address=10.88.4.0/24 gateway=10.88.1.18
add distance=1 dst-address=86.109.64.70/32 gateway=pppoe-out1
add comment="Hajmasker Gabor Aron iskola" disabled=yes distance=1 dst-address=86.109.69.108/30 gateway=10.88.1.18
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/routing filter
add action=discard chain=ospf-out prefix=192.168.88.0/24 prefix-length=24
add action=discard chain=ospf-out prefix=10.0.0.1 prefix-length=32
/routing ospf interface
add interface=l2tp-budapest network-type=point-to-point
/routing ospf network
add area=backbone network=10.250.0.129/32
/snmp
set contact=magic@magicnet.hu enabled=yes location=Veszprem
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Budapest
/system identity
set name=gw-veszprem
/system logging
add action=remote topics=info
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=warning
add disabled=yes topics=ospf
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system routerboard settings
set cpu-frequency=896MHz
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=apr/01/2014 start-time=16:51:23
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/system\_backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n"
/system watchdog
set auto-send-supout=yes ping-start-after-boot=35m send-email-from=gw-veszprem@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 watch-address=86.109.64.70
/tool e-mail
set address=86.109.64.10 from=gw-veszprem@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add