#              model: LHGGR
#      serial-number: HG409WHR5CG
#      firmware-type: a3700
#   current-firmware: 7.12.2
#   installed-version: 7.15.3
# 
# software id = NURC-YDZ4
#
# model = LHGGR
# serial number = HG409WHR5CG
/interface lte
set [ find default-name=lte1 ] allow-roaming=no band="" sms-read=no
/interface list
add name=discovery
/interface lte apn
set [ find default=yes ] apn=net use-network-apn=no
/ip pool
add name=dhcp_pool0 ranges=86.109.72.70
/ip dhcp-server
add address-pool=dhcp_pool0 interface=ether1 lease-time=10m name=dhcp1
/port
set 0 name=serial0
/interface l2tp-client
add add-default-route=yes allow-fast-path=yes connect-to=86.109.64.70 disabled=no name=l2tp-budapest password=USIHUIhs82h profile=default user=mobil86
/queue simple
add max-limit=50M/50M name=WHB target=86.109.72.70/32
/snmp community
set [ find default=yes ] addresses=10.0.0.0/8,86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/ip neighbor discovery-settings
set discover-interface-list=discovery
/interface list member
add interface=l2tp-budapest list=discovery
/ip address
add address=86.109.72.69/30 interface=ether1 network=86.109.72.68
/ip dhcp-server network
add address=86.109.72.68/30 dns-server=86.109.64.5,86.109.64.66 gateway=86.109.72.69
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
/ip firewall filter
add action=accept chain=input src-address=86.109.64.248
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip route
add disabled=no dst-address=86.109.64.70/32 gateway=lte1 routing-table=main suppress-hw-offload=no
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/snmp
set contact=admin@rlan.hu enabled=yes location=Szeged
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-mobil86-WHBSzeged
/system logging
add action=remote topics=info
add action=remote topics=error
add action=remote topics=warning
add action=remote topics=critical
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=time.rlan.hu
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2019-05-14 start-time=14:03:24
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n"
/tool e-mail
set from=gw-mobil86@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"