#              model: RBM11G
#      serial-number: 8BAA08D761C0
#      firmware-type: mt7621L
#   current-firmware: 7.15.3
#   installed-version: 7.16
# 
# software id = TNRG-TY9I
#
# model = RBM11G
# serial number = 8BAA08D761C0
/interface lte
set [ find default-name=lte1 ] allow-roaming=no network-mode=lte pin=6279 sms-protocol=auto sms-read=no
/interface lte apn
set [ find default=yes ] apn=net ip-type=ipv4 use-network-apn=no
/ip pool
add name=dhcp_pool0 ranges=86.109.68.58
/ip dhcp-server
add address-pool=dhcp_pool0 interface=ether1 lease-time=1m name=dhcp1
/ip smb users
set [ find default=yes ] disabled=yes
/port
set 0 name=serial0
/interface l2tp-client
add connect-to=86.109.64.70 disabled=no name=l2tp-budapest password=UveGjan1 profile=default user=mobil8
/queue simple
add limit-at=20M/50M max-limit=20M/50M name="Mobil08 DRAVANET Fidesz Bp Cinkotai u" target=86.109.68.58/32
/routing table
add fib name=budapest
/snmp community
set [ find default=yes ] addresses=10.0.0.2/32,86.109.64.0/27
add addresses=10.0.0.2/32,86.109.64.0/27 name=partnerlogin
/system logging action
set 3 remote=86.109.64.16
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=all
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=8192
/interface ovpn-server server
set auth=sha1,md5
/ip address
add address=86.109.68.57/30 interface=ether1 network=86.109.68.56
/ip dhcp-client
add add-default-route=no interface=ether1
/ip dhcp-server network
add address=86.109.68.56/30 dns-server=86.109.64.5,86.109.64.66 gateway=86.109.68.57
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=1,5 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip firewall mangle
add action=mark-routing chain=prerouting disabled=yes new-routing-mark=budapest passthrough=yes src-address=86.109.68.56/30
add action=mark-routing chain=output disabled=yes new-routing-mark=budapest passthrough=yes src-address=86.109.68.56/30
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.250.0.19 pref-src="" routing-table=main scope=30 suppress-hw-offload=no target-scope=10
add disabled=no dst-address=86.109.64.70/32 gateway=lte1 routing-table=main suppress-hw-offload=no
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/ip smb shares
set [ find default=yes ] directory=/flash/pub
/ip socks
set port=4145
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/routing bfd configuration
add disabled=no interfaces=all min-rx=200us min-tx=200us multiplier=5
/snmp
set contact=admin@rlan.hu enabled=yes location=Mobil8
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-dravanetfideszcinkotaiu
/system logging
add action=remote topics=info
add action=remote topics=error
add prefix=r topics=critical
add action=remote topics=warning
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=86.109.64.5
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2018-02-28 start-time=19:34:45
add interval=30s name=schedule3_ on-event=script3_ policy=ftp,reboot,read,write,policy,test,password,sensitive start-time=startup
/system script
add dont-require-permissions=no name=mentes owner=root policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup "
/system watchdog
set ping-start-after-boot=15m watch-address=86.109.64.70
/tool e-mail
set from=gw-mobil8@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"