#              model: RBD52G-5HacD2HnD
#      serial-number: D7160D0875C7
#      firmware-type: ipq4000L
#   current-firmware: 6.48.3
#   installed-version: 6.49.7
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = QXRJ-0V8T
#
# model = RBD52G-5HacD2HnD
# serial number = D7160D0875C7
/interface bridge
add name=bridge-management
/interface ethernet
set [ find default-name=ether1 ] comment="Uplink Telekom"
set [ find default-name=ether2 ] comment="Bedo Iskola"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=dsjnf999
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n channel-width=20/40mhz-Ce comment="Management 2.4GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT station-roaming=enabled wireless-protocol=802.11
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="Management 5Ghz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT station-roaming=enabled wireless-protocol=802.11
/interface wireless manual-tx-power-table
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5Ghz"
/interface wireless nstreme
set wlan1 comment="Management 2.4GHz"
set wlan2 comment="Management 5Ghz"
/ip pool
add name=dhcp_pool0 ranges=86.109.70.14
add name=dhcp_pool1 ranges=192.168.88.2-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=ether2 name=dhcp1
add address-pool=dhcp_pool1 disabled=no interface=bridge-management name=dhcp2
/interface l2tp-client
add add-default-route=yes allow-fast-path=yes connect-to=86.109.64.70 disabled=no mrru=1600 name=l2tp-budapest password=HSX92erp profile=default user=asotthalom
/queue simple
add limit-at=20M/120M max-limit=20M/120M name="KIFU Bedo Iskola" target=86.109.70.14/32
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp"
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge-management interface=wlan1 multicast-router=disabled
add bridge=bridge-management interface=wlan2 multicast-router=disabled
add bridge=bridge-management interface=ether5 multicast-router=disabled
/interface bridge settings
set use-ip-firewall=yes
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=86.109.70.13/30 interface=ether2 network=86.109.70.12
add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0
/ip dhcp-client
add default-route-distance=10 disabled=no interface=ether1
/ip dhcp-server network
add address=86.109.70.12/30 dns-server=86.109.64.5,86.109.64.66 gateway=86.109.70.13
add address=192.168.88.0/24 dns-server=86.109.64.5,86.109.64.66 gateway=192.168.88.1
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000
add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
add action=fasttrack-connection chain=forward connection-state=established,related protocol=tcp
add action=accept chain=forward connection-state=established,related protocol=tcp
/ip firewall nat
add action=masquerade chain=srcnat src-address=192.168.88.0/24
/ip service
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/snmp
set contact=admin@rlan.hu enabled=yes location=Asotthalom
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=gw-asotthalombedoiskola
/system logging
add action=remote topics=info
add action=remote topics=error
add action=remote topics=critical
add action=remote topics=warning
/system ntp client
set enabled=yes server-dns-names=time.rlan.hu
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=may/19/2021 start-time=10:10:51
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/system watchdog
set ping-start-after-boot=55m watch-address=86.109.64.70
/tool e-mail
set address=86.109.64.10 from=gw-asotthalombedoiskola@magicnet.hu
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add