# model: RBD52G-5HacD2HnD # serial-number: D7160D54FA77 # firmware-type: ipq4000L # current-firmware: 6.48.1 # installed-version: 6.49.13 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = R3NU-Q88P # # model = RBD52G-5HacD2HnD # serial number = D7160D54FA77 /interface bridge add name=bridge-management add name=bridge1 /interface ethernet set [ find default-name=ether1 ] comment=UPLINK set [ find default-name=ether2 ] comment="Iskola link" set [ find default-name=ether5 ] comment=Aramszunet /interface pppoe-client add add-default-route=yes default-route-distance=10 disabled=no interface=ether1 name=pppoe-out1 password=Sunshine112@6G user=lesencetomaj1@rlan.hu /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=dsjnf999 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-Ce comment="Management 2.4GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT station-roaming=enabled wireless-protocol=802.11 set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40mhz-Ce comment="Management 5GHz" country=hungary disabled=no mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT station-roaming=enabled wireless-protocol=802.11 /interface wireless manual-tx-power-table set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /interface wireless nstreme set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /interface l2tp-client add add-default-route=yes allow-fast-path=yes connect-to=86.109.64.70 disabled=no mrru=1630 name=l2tp-out1 password=HSX92erp profile=default user=lesencetomaj /queue simple add limit-at=120M/120M max-limit=120M/120M name="KIFU Lesence Volgye Altalanos Iskola" target=86.109.69.234/32 /routing ospf instance set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1 router-id=10.87.0.1 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 /user group set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp" add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge-management interface=wlan1 multicast-router=disabled add bridge=bridge-management interface=wlan2 multicast-router=disabled add bridge=bridge1 interface=ether5 add bridge=bridge1 interface=ether2 /ip neighbor discovery-settings set discover-interface-list=all /ip address add address=10.87.0.1/24 interface=bridge1 network=10.87.0.0 add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0 /ip dns set servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=L2tp dst-port=1701 in-interface=all-ppp protocol=udp add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=accept chain=input comment="Bandwidth test" protocol=tcp src-address-list=support src-port=2000 add action=accept chain=input comment="Bandwidth test" dst-port=2000 protocol=tcp src-address-list=support add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.88.0/24 /ip route add distance=1 dst-address=86.109.69.232/30 gateway=10.87.0.6 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /routing filter add action=discard chain=ospf-out prefix=86.109.64.70 prefix-length=32 add action=discard chain=ospf-out prefix=86.109.64.247 prefix-length=32 add action=discard chain=ospf-out prefix=192.168.88.0/24 prefix-length=24 add action=discard chain=ospf-out prefix=192.168.1.0/24 prefix-length=24 add action=discard chain=ospf-out prefix=10.240.0.0/20 prefix-length=20 /routing ospf interface add interface=l2tp-out1 network-type=point-to-point add passive=yes /routing ospf network add area=backbone network=10.250.0.179/32 /snmp set contact=admin@rlan.hu enabled=yes location=Lesencetomaj /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-lesencetomaj /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning add disabled=yes topics=ospf /system ntp client set enabled=yes server-dns-names=time.rlan.hu /system routerboard settings set cpu-frequency=896MHz /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=apr/29/2021 start-time=08:47:32 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set ping-start-after-boot=55m watch-address=86.109.64.70 /tool e-mail set address=86.109.64.10 from=gw-lesencetomaj@magicnet.hu /tool graphing interface add /tool graphing queue add /tool graphing resource add /tool sniffer set file-name=cap filter-interface=l2tp-out1