# model: RBD52G-5HacD2HnD # serial-number: D7160DDA93DB # firmware-type: ipq4000L # current-firmware: 6.47.8 # installed-version: 7.13.5 # Flags: U - UNDOABLE # Columns: ACTION, BY, POLICY, TIME # ACTION BY POLICY TIME # U user mentes added admin write 2024-08-02 12:43:33 # policy # U user group backup added admin write 2024-08-02 12:43:33 # policy # # software id = Z67P-B6UW # # model = RBD52G-5HacD2HnD # serial number = D7160DDA93DB /interface bridge add name=bridge-l2tp port-cost-mode=short add name=bridge-management port-cost-mode=short add name=bridge-vlan2530 port-cost-mode=short add admin-mac=E4:8D:8C:EA:AB:11 auto-mac=no fast-forward=no name=bridge1 port-cost-mode=short /interface ethernet set [ find default-name=ether1 ] comment="UPLINK DIGI" set [ find default-name=ether2 ] comment="Vizmu telep" l2mtu=1620 mtu=1604 set [ find default-name=ether5 ] comment=Aramszunet /interface pppoe-client add add-default-route=yes default-route-distance=200 disabled=no interface=ether1 name=pppoe-out1 password=p9LKsTU5 user=rxxcom-sma /interface vlan add interface=bridge-l2tp mtu=1600 name=vlan2530-Budapestfele vlan-id=2530 add interface=ether2 mtu=1600 name=vlan2530-ntg-TarnazsadanyOnkormanyzat vlan-id=2530 /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /ip ipsec proposal set [ find default=yes ] enc-algorithms=aes-128-cbc /ppp profile set *0 bridge=bridge1 add bridge=bridge-l2tp name=l2tp use-compression=no use-encryption=no /interface l2tp-client add allow-fast-path=yes connect-to=86.109.64.90 mrru=1600 name=l2tp-TESZT password=ioefrjf3jioJOIjd3 profile=default user=ppp1 add connect-to=86.109.64.70 disabled=no mrru=1622 name=l2tp-budapest password=UvEgJaNi99 profile=l2tp user=gyongyos /routing bgp template set default disabled=no output.network=bgp-networks /routing ospf instance add disabled=yes name=default-v2 out-filter-chain=ospf-out redistribute=connected,static,vpn,dhcp,modem router-id=10.220.0.18 /routing ospf area add disabled=no instance=default-v2 name=backbone-v2 add area-id=10.220.0.16 disabled=yes instance=default-v2 name=gyongyos /snmp community set [ find default=yes ] addresses=86.109.64.0/27,10.0.0.2/32 /system logging action set 1 disk-file-name=log set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api" #error exporting "/interface/bridge/calea" /interface bridge port add bridge=bridge1 hw=no ingress-filtering=no interface=ether2 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether3 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether4 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether5 internal-path-cost=10 path-cost=10 add bridge=bridge-vlan2530 ingress-filtering=no interface=vlan2530-Budapestfele internal-path-cost=10 path-cost=10 add bridge=bridge-vlan2530 ingress-filtering=no interface=vlan2530-ntg-TarnazsadanyOnkormanyzat internal-path-cost=10 path-cost=10 /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-vlan=yes /ip neighbor discovery-settings set discover-interface-list=all /ip settings set max-neighbor-entries=8192 /ipv6 settings set disable-ipv6=yes max-neighbor-entries=8192 /interface ovpn-server server set auth=sha1,md5 /ip address add address=10.37.0.1/24 interface=bridge1 network=10.37.0.0 add address=10.36.0.1/24 disabled=yes interface=ether2 network=10.36.0.0 add address=10.220.0.18/30 interface=bridge-l2tp network=10.220.0.16 /ip dns set servers=86.109.64.5,8.8.8.8 /ip firewall address-list add address=86.109.64.0/27 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ez torolheto" list=support add address=192.168.88.0/24 list=support #error exporting "/ip/firewall/calea" /ip firewall filter add action=accept chain=input src-address=86.109.64.70 add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 disabled=yes protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes add action=accept chain=forward connection-state=established,related /ip firewall nat add action=dst-nat chain=dstnat dst-address=10.37.0.1 dst-port=80,443 protocol=tcp to-addresses=192.168.1.22 /ip route add check-gateway=ping disabled=no dst-address=0.0.0.0/0 gateway=10.250.0.151 add disabled=no dst-address=86.109.64.70/32 gateway=pppoe-out1 add disabled=no dst-address=86.109.69.0/30 gateway=10.36.0.5 add disabled=no dst-address=86.109.69.4/30 gateway=10.36.0.6 add disabled=no dst-address=86.109.69.8/30 gateway=10.36.0.7 add disabled=no dst-address=86.109.69.12/30 gateway=10.36.0.8 add disabled=no dst-address=86.109.69.16/30 gateway=10.36.0.9 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip smb shares set [ find default=yes ] directory=/pub /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /routing filter rule add chain=ospf-out disabled=no rule="if (dst in 10.0.0.1 && dst-len == 32) { reject; }" add chain=ospf-out disabled=no rule="if (dst in 86.109.64.70 && dst-len == 32) { reject; }" /snmp set contact=admin@rlan.hu enabled=yes location=Gyongyos /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-gyongyos /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning add disabled=yes topics=ospf /system note set show-at-login=no /system ntp client set enabled=yes /system ntp client servers add address=86.109.64.5 /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2020-12-07 start-time=09:51:42 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n" /system watchdog set watch-address=86.109.64.70 /tool e-mail set from=gw-gyongyos@magicnet.hu server=86.109.64.10 /tool graphing interface add /tool graphing queue add /tool graphing resource add