# model: RBD52G-5HacD2HnD # serial-number: D7160D392023 # firmware-type: ipq4000L # current-firmware: 6.48 # installed-version: 6.49.5 # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = AF7W-T0S0 # # model = RBD52G-5HacD2HnD # serial number = D7160D392023 /interface bridge add name=bridge-management add admin-mac=08:55:31:76:53:AF auto-mac=no name=bridge-vlan2537 /interface ethernet set [ find default-name=ether1 ] comment="Uplink Berotel" /interface vlan add interface=bridge-vlan2537 name=vlan99-management vlan-id=99 /interface list add comment=defconf name=WAN add comment=defconf name=LAN add name=discover /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=wpa2 supplicant-identity="" wpa2-pre-shared-key=dsjnf999 /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-g/n channel-width=20/40mhz-XX comment="Management 2.4GHz" country=no_country_set disabled=no distance=indoors frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11 wps-mode=disabled set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee comment="Management 5GHz" country=no_country_set disabled=no distance=indoors frequency-mode=superchannel mode=ap-bridge security-profile=wpa2 ssid=RLAN_MNGMNT wireless-protocol=802.11 /interface wireless manual-tx-power-table set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /interface wireless nstreme set wlan1 comment="Management 2.4GHz" set wlan2 comment="Management 5GHz" /ip pool add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254 /ip dhcp-server add address-pool=dhcp_pool0 disabled=no interface=bridge-management name=dhcp1 /ppp profile add bridge=bridge-vlan2537 name=l2tp /interface l2tp-client add connect-to=86.109.64.70 disabled=no mrru=1620 name=l2tp-budapest password=UveGjan1 profile=l2tp user=pely /queue simple add limit-at=120M/120M max-limit=120M/120M name="Vlan2537 ntg Pely Onkormanzyat" target=ether2 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp" #error exporting /interface bridge calea /interface bridge port add bridge=bridge-vlan2537 interface=ether2 add bridge=bridge-vlan2537 disabled=yes interface=ether3 add bridge=bridge-vlan2537 disabled=yes interface=ether4 add bridge=bridge-vlan2537 disabled=yes interface=ether5 add bridge=bridge-management interface=wlan1 add bridge=bridge-management interface=wlan2 /interface bridge settings set use-ip-firewall=yes /ip neighbor discovery-settings set discover-interface-list=discover /interface list member add comment=defconf interface=bridge-vlan2537 list=LAN add comment=defconf interface=ether1 list=WAN add list=discover /ip address add address=192.168.201.2/24 interface=ether1 network=192.168.201.0 add address=192.168.88.1/24 interface=bridge-management network=192.168.88.0 add address=10.239.0.5/24 interface=vlan99-management network=10.239.0.0 /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 /ip dns set servers=86.109.64.5,8.8.8.8 /ip dns static add address=192.168.88.1 comment=defconf name=router.lan /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support #error exporting /ip firewall calea /ip firewall filter add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.88.0/24 /ip route add check-gateway=ping distance=1 gateway=10.250.0.177 add distance=10 gateway=192.168.201.1 add check-gateway=ping distance=1 dst-address=86.109.64.0/27 gateway=10.239.0.1 add distance=1 dst-address=86.109.64.70/32 gateway=192.168.201.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /snmp set contact=admin@rlan.hu enabled=yes location=Pely /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-pely /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system ntp client set enabled=yes server-dns-names=time.rlan.hu /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=apr/09/2021 start-time=11:01:41 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /system watchdog set ping-start-after-boot=55m watch-address=86.109.64.70 /tool e-mail set address=86.109.64.10 from=gw-pely@megicnet.hu /tool graphing interface add /tool graphing queue add /tool graphing resource add /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN