# version: 7.18.2 (stable) # total-memory: 128.0MiB # cpu: MIPS 74Kc V4.12 # cpu-count: 1 # total-hdd-space: 128.0MiB # architecture-name: mipsbe # board-name: RB2011UiAS # platform: MikroTik # installed-version: 7.18.2 # Flags: U - UNDOABLE # Columns: ACTION, POLICY, TIME # ACTION POLICY TIME # U ovpn server added read 2025-03-10 12:59:11 # U ntp server record added read 2025-03-10 12:59:11 # # software id = F3WJ-B3P0 # # model = RB2011UiAS # serial number = 444804B6A2D7 /interface bridge add name=bridge-durer port-cost-mode=short add name=bridge-ensi port-cost-mode=short add name=bridge1 port-cost-mode=short /interface ethernet set [ find default-name=ether1 ] comment=UPLINK set [ find default-name=ether2 ] comment="ENSI Budapart epitkezes" set [ find default-name=ether3 ] comment="Aramszunet figyelo" set [ find default-name=ether4 ] comment="RACK FELE 2. kabel / Tartalek" disabled=yes set [ find default-name=ether5 ] comment="Durer fele" set [ find default-name=ether6 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" comment="JATSZOHAZ HOTSPOT ESZAK" set [ find default-name=ether7 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" comment="JASTZOHAZ HOTSPOT DEL" set [ find default-name=ether8 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" comment="HOTSPOT LINK DEL" set [ find default-name=ether9 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" comment="ENSI BOC" set [ find default-name=ether10 ] advertise="10M-baseT-half,10M-baseT-full,100M-baseT-half,100M-baseT-full,1G-baseT-half,1G-baseT-full" comment="Lehet hibas a port" /interface vlan add interface=ether1 name=vlan401-durer vlan-id=401 add interface=ether1 name=vlan402-ensi vlan-id=402 /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /ip hotspot user profile set [ find default=yes ] mac-cookie-timeout=12h rate-limit=2m/2m shared-users=2000 /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /ip smb users set [ find default=yes ] disabled=yes /port set 0 name=serial0 /queue simple add disabled=yes limit-at=10M/10M max-limit=10M/10M name="PROPERTY KOPASZI HOTSPOT" target=86.109.67.86/32 add burst-limit=15M/15M burst-threshold=9M/9M burst-time=1m/1m disabled=yes limit-at=10M/10M max-limit=10M/10M name="ENSI Kopaszi" target=86.109.67.110/32 add burst-limit=40M/40M burst-threshold=27M/27M burst-time=1m/1m disabled=yes limit-at=30M/30M max-limit=30M/30M name="MCMBETON KOPASZI" target=86.109.67.142/32 add burst-limit=15M/15M burst-threshold=9M/9M burst-time=1m/1m disabled=yes limit-at=10M/10M max-limit=10M/10M name="ENSI Kopaszi BOC" target=86.109.67.234/32 add disabled=yes limit-at=5M/5M max-limit=5M/5M name="RIO RADIO VONAL" target=86.109.67.150/32 add disabled=yes limit-at=2M/10M max-limit=2M/10M name="PONYVAREGENY KOPASZI" target=86.109.67.26/32 add disabled=yes limit-at=20M/20M max-limit=20M/20M name="ANTEUS RENDORSEGI EPULET" target=86.109.67.62/32 add disabled=yes limit-at=20M/20M max-limit=20M/20M name="Vizirendorseg kopaszi Gat" target=86.109.67.2/32 add disabled=yes limit-at=100M/100M max-limit=100M/100M name="PROPERTY RENDORSEGI EPULET" target=86.109.67.66/32 add disabled=yes limit-at=60M/60M max-limit=60M/60M name="PROPERTY MARKET KOPASZI GAT" target=86.109.66.86/32 add burst-time=1m/1m disabled=yes limit-at=30M/50M max-limit=30M/50M name="ENSI MOL Campus" target=86.109.68.250/32 /routing bgp template set default disabled=no output.network=bgp-networks /routing ospf instance add disabled=no name=default-v2 redistribute=connected,static,vpn,dhcp,modem add disabled=no name=default-v3 version=3 /routing ospf area add disabled=yes instance=default-v2 name=backbone-v2 add area-id=0.0.0.230 disabled=yes instance=default-v2 name=pppoe230-v2 add disabled=yes instance=default-v3 name=backbone-v3 /snmp community set [ find default=yes ] addresses=86.109.64.0/27,10.0.0.2/32 add addresses=86.109.64.0/27,10.0.0.2/32 name=partnerlogin /system logging action set 3 remote=86.109.64.16 /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api" /interface bridge port add bridge=bridge-ensi hw=no ingress-filtering=no interface=ether2 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether3 internal-path-cost=10 path-cost=10 add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether4 internal-path-cost=10 path-cost=10 add bridge=bridge-durer hw=no ingress-filtering=no interface=ether5 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether6 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether7 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether8 internal-path-cost=10 path-cost=10 add bridge=bridge1 hw=no ingress-filtering=no interface=ether9 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether1 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether10 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge-durer ingress-filtering=no interface=vlan401-durer internal-path-cost=10 path-cost=10 add bridge=bridge-ensi ingress-filtering=no interface=vlan402-ensi internal-path-cost=10 path-cost=10 /interface bridge settings set use-ip-firewall=yes /ip firewall connection tracking set udp-timeout=10s /ip neighbor discovery-settings set discover-interface-list=!dynamic /ip settings set max-neighbor-entries=8192 /ipv6 settings set disable-ipv6=yes max-neighbor-entries=8192 /interface ovpn-server server add auth=sha1,md5 mac-address=FE:A6:89:3D:4F:BF name=ovpn-server1 /interface pptp-server server # PPTP connections are considered unsafe, it is suggested to use a more modern VPN protocol instead set enabled=yes mrru=1600 /ip address add address=10.1.20.4/24 interface=bridge1 network=10.1.20.0 /ip dns set servers=86.109.64.5,86.109.64.66 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support /ip firewall filter add action=drop chain=forward comment="Ideiglenes szab\E1ly a PM telefonk\F6zpont telnet felt\F6r\E9s miatt" disabled=yes dst-port=21-23 protocol=tcp src-address=86.109.67.66 add action=drop chain=forward comment="Ideiglenes szab\E1ly a PM telefonk\F6zpont telnet felt\F6r\E9s miatt" disabled=yes dst-address=86.109.67.66 dst-port=8089 protocol=tcp src-address=!86.109.64.0/19 add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes add action=accept chain=forward connection-state=established,related /ip hotspot user add name=admin password=kopaszduna98 /ip hotspot walled-garden add comment="place hotspot rules here" disabled=yes /ip hotspot walled-garden ip add action=accept disabled=no dst-address=86.109.64.0/27 !dst-address-list !dst-port !protocol !src-address !src-address-list /ip ipsec policy set 0 dst-address=0.0.0.0/0 src-address=0.0.0.0/0 /ip ipsec profile set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5 /ip proxy access add /ip route add check-gateway=ping disabled=no dst-address=0.0.0.0/0 gateway=10.1.20.1 /ip service set www address=86.109.64.11/32,86.109.64.20/32 set api address=86.109.64.0/27,10.0.0.2/32 set api-ssl address=86.109.64.0/27,10.0.0.2/32 /ip smb shares set [ find default=yes ] directory=/pub /ipv6 nd set [ find default=yes ] advertise-dns=no /lcd set default-screen=stats-all read-only-mode=yes time-interval=daily /ppp aaa set interim-update=5m use-radius=yes /ppp profile set *0 dns-server=86.109.64.5,86.109.64.66 local-address=10.1.3.1 only-one=yes rate-limit=64k remote-address=*2 use-upnp=no /radius incoming set accept=yes port=1700 /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /snmp set contact=magic@magicnet.hu enabled=yes location=Budapest /system clock set time-zone-autodetect=no time-zone-name=Europe/Budapest /system identity set name=gw-kopaszi2 /system logging add action=remote topics=info add action=remote topics=critical add action=remote topics=error add action=remote topics=warning /system note set show-at-login=no /system ntp client set enabled=yes /system ntp client servers add address=86.109.64.5 /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=2014-06-01 start-time=18:28:05 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/export\_file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc \r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n\r\n" /system watchdog set auto-send-supout=yes send-email-from=gw-kopaszi@magicnet.hu send-email-to=magic@magicnet.hu send-smtp-server=86.109.64.10 /tool e-mail set from=gw-kopaszi2@magicnet.hu server=86.109.64.10 /tool graphing interface add /tool graphing queue add /tool graphing resource add /tool sniffer set filter-interface=ether5