#              model: RouterBOARD wAP G-5HacT2HnD
#      serial-number: 71A5061A5553
#      firmware-type: qca9550L
#   current-firmware: 6.48.1
#   installed-version: 6.49.6
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# U user mentes added                        admin            write              
#                                                             policy             
# U user group backup added                  admin            write              
#                                                             policy             
# 
# software id = 4Z3U-49QX
#
# model = RouterBOARD wAP G-5HacT2HnD
# serial number = 71A5061A5553
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
/interface bridge
add fast-forward=no name=bridge-link
/interface wireless
# managed by CAPsMAN
# channel: 2452/20-Ce/gn(18dBm), SSID: BUDAPART, CAPsMAN forwarding
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode comment="Obolhaz OBOL FELE" country=hungary frequency=2427 mode=ap-bridge radio-name=AP1 ssid=KOPASZI station-roaming=enabled wireless-protocol=802.11
# managed by CAPsMAN
# channel: 5240/20-eeeC/ac/P(23dBm), SSID: BUDAPART, CAPsMAN forwarding
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode antenna-gain=0 band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX comment="UPLINK RENDORSEG" country=uzbekistan frequency-mode=superchannel mode=station-bridge nv2-preshared-key=dsjnf999 nv2-security=enabled radio-name=Obolhaz scan-list=5700,default ssid=RLAN_REOB station-roaming=enabled wireless-protocol=nv2
/interface wireless nstreme
# managed by CAPsMAN
# channel: 2452/20-Ce/gn(18dBm), SSID: BUDAPART, CAPsMAN forwarding
set wlan1 comment="Obolhaz OBOL FELE"
# managed by CAPsMAN
# channel: 5240/20-eeeC/ac/P(23dBm), SSID: BUDAPART, CAPsMAN forwarding
set wlan2 comment="UPLINK RENDORSEG" enable-nstreme=yes
/interface wireless manual-tx-power-table
# managed by CAPsMAN
# channel: 2452/20-Ce/gn(18dBm), SSID: BUDAPART, CAPsMAN forwarding
set wlan1 comment="Obolhaz OBOL FELE"
# managed by CAPsMAN
# channel: 5240/20-eeeC/ac/P(23dBm), SSID: BUDAPART, CAPsMAN forwarding
set wlan2 comment="UPLINK RENDORSEG"
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/snmp community
set [ find default=yes ] addresses=86.109.64.0/27
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!dude,!tikapp"
#error exporting /interface bridge calea
/interface bridge port
add bridge=bridge-link hw=no interface=ether1
add bridge=bridge-link interface=wlan2
/interface bridge settings
set use-ip-firewall=yes
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface wireless cap
# 
set certificate=request discovery-interfaces=bridge-link enabled=yes interfaces=wlan1,wlan2
/ip address
add address=10.1.20.34/24 interface=bridge-link network=10.1.20.0
/ip dns
set servers=86.109.64.5
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=192.168.88.0/24 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support
#error exporting /ip firewall calea
/ip firewall filter
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
add action=fasttrack-connection chain=forward connection-state=established,related
add action=accept chain=forward connection-state=established,related
/ip route
add distance=1 gateway=10.1.20.1
/ip service
set www address=86.109.64.0/27,10.0.1.0/24
/ip smb shares
set [ find default=yes ] directory=/pub
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact=admin@rlan.hu enabled=yes location=Budapest
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=Hotspot-AP3-KopasziObolhazEszak
/system leds
set 0 interface=wlan1
set 1 interface=wlan2
/system ntp client
set enabled=yes primary-ntp=86.109.64.5
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=dec/02/2019 start-time=13:01:26
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup"
/tool e-mail
set address=86.109.64.10 from=Hotspot-AP3-KopasziObolhazEszak@magicnet.hu