# version: 7.20.8 (long-term) # factory-software: 6.43.10 # total-memory: 64.0MiB # cpu: MIPS 74Kc V4.12 # cpu-count: 1 # total-hdd-space: 128.0MiB # architecture-name: mipsbe # board-name: RB2011iLS # platform: MikroTik # installed-version: 7.20.8 # Flags: U - UNDOABLE # Columns: ACTION, BY, POLICY, TIME # ACTION BY POLICY TIME # U device changed admin write 2026-02-19 11:39:51 # U bridge port changed admin write 2026-02-19 11:34:49 # U device changed admin write 2026-02-19 11:32:30 # U bridge port changed admin write 2026-01-29 14:32:28 # # software id = 7TWS-AP8L # # model = RB2011iLS # serial number = 7DD20B08815B /interface bridge add name=bridge1 /interface ethernet set [ find default-name=ether1 ] comment=UPLINK set [ find default-name=ether2 ] comment="BOE fele" set [ find default-name=ether3 ] comment="Wifi-k fele" set [ find default-name=ether6 ] comment="User ag 5GHz" set [ find default-name=ether7 ] comment="Aramszunet figyelo" /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /ip smb users set [ find default=yes ] disabled=yes /port set 0 name=serial0 /queue simple add limit-at=100M/100M max-limit=100M/100M name="BUDAPART 7.emelet" target=86.109.67.54/32 /routing bgp template set default as=65530 disabled=no output.network=bgp-networks /routing ospf instance add disabled=no name=default-v2 redistribute=connected,static,vpn,dhcp,modem /routing ospf area add disabled=yes instance=default-v2 name=backbone-v2 /snmp community set [ find default=yes ] addresses=86.109.64.0/27 /system logging action set 3 remote=86.109.64.16 add email-start-tls=yes email-to=soc@rlan.hu name=email target=email /user group add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api" /interface bridge port add bridge=bridge1 ingress-filtering=no interface=ether1 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether5 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether2 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether7 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether6 internal-path-cost=10 path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether4 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether8 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether9 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge1 ingress-filtering=no interface=ether10 internal-path-cost=10 multicast-router=disabled path-cost=10 add bridge=bridge1 interface=ether3 /ip firewall connection tracking set udp-timeout=10s /ip neighbor discovery-settings set discover-interface-list=!dynamic /ip settings set max-neighbor-entries=8192 /ipv6 settings set disable-ipv6=yes max-neighbor-entries=8192 /interface ovpn-server server add auth=sha1,md5 mac-address=FE:DC:C7:BA:0B:43 name=ovpn-server1 /ip address add address=10.1.12.91/24 interface=bridge1 network=10.1.12.0 /ip dns set servers=86.109.64.5 /ip firewall address-list add address=86.109.64.0/27 list=support add address=192.168.88.0/24 list=support add address=10.0.0.0/8 list=support add address=86.109.64.0/19 comment="Ezt ki lehet torolni, csak a beallitashoz kell" list=support /ip firewall filter add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes add action=accept chain=forward connection-state=established,related add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1 add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support add action=accept chain=input comment="Accept to established connections" connection-state=established add action=accept chain=input comment="Accept to related connections" connection-state=related add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support add action=accept chain=input dst-address=255.255.255.255 add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=10,15 protocol=icmp add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp /ip ipsec profile set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5 /ip route add disabled=no distance=200 dst-address=0.0.0.0/0 gateway=10.1.12.1 /ip service set www address=86.109.64.0/27 set api address=86.109.64.0/27 set api-ssl address=86.109.64.0/27 /ip smb shares set [ find default=yes ] directory=/pub /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /snmp set contact=admin@rlan.hu enabled=yes location=Budapest /system clock set time-zone-name=Europe/Budapest /system identity set name=gw-boc2 /system logging add action=email topics=critical add action=remote topics=info add action=remote topics=error add action=remote topics=warning add action=remote topics=critical /system scheduler add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2020-06-30 start-time=13:16:00 /system script add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup" /tool e-mail set from=gw-boc2@magicnet.hu server=86.109.64.10 /tool graphing interface add /tool graphing queue add /tool graphing resource add