#              model: CRS310-8G+2S+
#      serial-number: HG209Z5WYXF
#      firmware-type: dx3230L
#   current-firmware: 7.12.2
#   installed-version: 7.15rc2
# Flags: U - UNDOABLE
# Columns: ACTION, BY, POLICY, TIME
#   ACTION                   BY     POLICY  TIME               
# U user mentes added        admin  write   2024-08-02 12:53:46
#                                   policy                     
# U user group backup added  admin  write   2024-08-02 12:53:45
#                                   policy                     
# U device changed           admin  write   2024-05-16 09:23:14
# 
# software id = H50Q-G9AV
#
# model = CRS310-8G+2S+
# serial number = HG209Z5WYXF
/interface bridge
add admin-mac=D4:01:C3:0F:30:2A auto-mac=no comment=defconf name=bridge port-cost-mode=short
/interface ethernet
set [ find default-name=ether1 ] name=ether1-uplink-pfw
set [ find default-name=ether2 ] name=ether2-switch2
set [ find default-name=ether3 ] name=ether3-mail3
set [ find default-name=ether4 ] name=ether4-proxmoxbackup
set [ find default-name=ether5 ] name=ether5-backup
set [ find default-name=ether6 ] name=ether6-T440tartalek
set [ find default-name=ether7 ] name=ether7-zabbix
set [ find default-name=ether8 ] name=ether8-uj-iroda
set [ find default-name=sfp-sfpplus1 ] comment=T440 name=sfp-sfpplus1-t440
/interface list
add name=discovery
/snmp community
set [ find default=yes ] addresses=10.0.0.0/8,86.109.64.0/27
/system logging action
set 3 remote=86.109.64.16
/interface bridge port
add bridge=bridge comment=defconf interface=ether1-uplink-pfw internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether2-switch2 internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether3-mail3 internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether4-proxmoxbackup internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether5-backup internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether6-T440tartalek internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether7-zabbix internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=ether8-uj-iroda internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=sfp-sfpplus1-t440 internal-path-cost=10 path-cost=10
add bridge=bridge comment=defconf interface=sfp-sfpplus2 internal-path-cost=10 path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip address
add address=10.0.0.3/24 interface=bridge network=10.0.0.0
/ip dns
set servers=86.109.64.5,86.109.64.66
/ip firewall address-list
add address=86.109.64.0/27 list=support
add address=10.0.0.0/8 list=support
add address=86.109.64.0/19 comment="Ez torolheto" list=support
add address=192.168.88.0/24 list=support
/ip firewall filter
add action=accept chain=input src-address=86.109.64.248
add action=accept chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp src-address-list=support
add action=drop chain=input comment=telnet,ssh,ftp dst-port=21-23 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder address-list-timeout=30m chain=input comment="Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp tcp-flags=syn
add action=drop chain=input comment="Drop to syn flood list" src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="Port Scanner Detect" protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop to port scan list" src-address-list=Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=ICMP protocol=icmp
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP FIN Stealth scan" protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/FIN scan" protocol=tcp tcp-flags=fin,syn
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="SYN/RST scan" protocol=tcp tcp-flags=syn,rst
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="FIN/PSH/URG scan" protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="ALL/ALL scan" protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
add action=add-src-to-address-list address-list=Port_Scanner address-list-timeout=1h chain=input comment="NMAP NULL scan" protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
add action=drop chain=input comment="Block all access to the winbox - except to support list # DO NOT ENABLE THIS RULE BEFORE ADD YOUR SUBNET IN THE SUPPORT ADDRESS LIST" dst-port=8291 protocol=tcp src-address-list=!support
add action=accept chain=input comment="Accept to established connections" connection-state=established
add action=accept chain=input comment="Accept to related connections" connection-state=related
add action=accept chain=input comment="Full access to SUPPORT address list" src-address-list=support
add action=accept chain=input dst-address=255.255.255.255
add action=log chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED" disabled=yes
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" icmp-options=8:0 limit=20,30:packet protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP protocol=icmp
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip route
add gateway=10.0.0.1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=86.109.64.0/27
set api address=86.109.64.0/27
set api-ssl address=86.109.64.0/27
/snmp
set contact=admin@rlan.hu enabled=yes location=Sopron
/system clock
set time-zone-name=Europe/Budapest
/system identity
set name=sw-sopron
/system logging
add action=remote topics=info
add action=remote topics=error
add action=remote topics=warning
add action=remote topics=critical
add disabled=yes topics=interface
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=time.rlan.hu
/system routerboard settings
set boot-os=router-os
/system scheduler
add interval=6d name=mentes on-event=mentes policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2019-05-14 start-time=14:03:24
/system script
add dont-require-permissions=no name=mentes owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="/export file=export\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" export\") file=export.rsc\r\n/system backup save name=backup\r\n/tool e-mail send from=\"backup@rlan.hu\" to=\"backup@rlan.hu\" subject=([/system identity get name] . \" Backup\") file=backup.backup\r\n"
/tool e-mail
set from=sw-sopron@magicnet.hu server=86.109.64.10
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add
/user group
add name=backup policy="ssh,read,sensitive,!local,!telnet,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!api,!romon,!rest-api"